Sorry set them both to ch 15, or to two other valid channels? Also thank you for your Elmers patience.
On Sun, Nov 24, 2019 at 18:59 Jim Unroe rock.unroe@gmail.com wrote:
On Sun, Nov 24, 2019 at 9:17 PM Darby Collier collier.darby@gmail.com wrote:
Okay Jim,
I did a factory upload from the stock image.
Then I uploaded the "Uploaded" image attached. I did not touch the
radio at all, then within less than a minute, downloaded the attached "Downloaded" image. As you can see, the radio once again changed the programming with no input from me. I'm at a loss. Should I try the same thing with the stock image and see if it changes that as well?
Darby,
There is no point to uploading the "stock" image if you follow it up by another image. The last image uploaded "wins".
Anyway it seems that the radio have some bits stuck in its memory. After you uploaded your UPLOADED.img file setting MR A channel: to 0 (0x0E9F = 0x00) and MR B channel: to 1 (0x0EA0 = 0x01) they come back to CHIRP as being set to 191 (0xBF) and 144 (0x90).
What I would like you to try now would but to upload you UPLOADED.img file and then manually set MR A channel: and MR B channel: to some other valid channels numbers and then download from the radio and send that to me to see what they come back as. Set them both to channel 15.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to DarbyInGreen at collier.darby@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com