If I was to set up the com port in advance what would be the ideal setting CHIRP wants to see?
On Sat, Jul 6, 2013 at 11:28 PM, Ronny Julian k4rjjradio@gmail.com wrote:
Yep but the FT-60 uses the other type without threads. Nothing wrong with my cable as it has worked fine before on these two machines when I had XP on them. This has to be a COM port permissions issue or a problem with the radio or maybe the program install.
The cable I have is one from KAWAMALL of eBay. I have bought 6 cables from them and not a bad one yet.
On Sat, Jul 6, 2013 at 11:11 PM, Jim and Karen jimw6llp@centurytel.netwrote:
Looks like the FT-60 uses the same type of cable that the VX-6 uses. I couldn't get any down loads with my VX-6. I noticed that the plug on the cable going to my radio had some screw threads on it near the covering and when I looked in the radio plug there were some there also. I then actually screwed the radio plug end of the cable into the plug on my radio and everything started working just fine. Made good contact I guess.
Jim, W6LLP
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users