Hi Jim,
When I go to select the radio type, it only goes up to the UV6D, and I have an 8D. Can I use the 6D type?
Thank you,
Steve Gouveia pctek@pacbell.net
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Sunday, March 29, 2015 08:41 To: Discussion of CHIRP Subject: Re: [chirp_users] Wouxun KG-UV8D
On Sun, Mar 29, 2015 at 11:12 AM, Steve Gouveia pctek@pacbell.net wrote:
Hello to all. I just purchased the Wouxun KG-UV8D. The programming software that came with it is so very basic. A few friends of mine recommended CHIRP. So I downloaded it. It’s much better to program with. When I went to upload the data to the radio, that function was unavailable (greyed out). I can download from the radio, just no upload. I tried CHIRP on my Kenwood TH-F6A and it worked fine.
Any idea what may be causing this problem or when CHIRP will support the Wouxun KG series?
Thank you
CHIRP works with a lot of radios. No matter which one, you have to download from the radio first so CHIRP knows which radio you are dealing with. You will see the radio Vendor/Model in the tab. Your tab likely says "Generic CSV" and cannot be uploaded to any radio. Save a copy of your downloaded tab "just in case". Then edit it as needed and upload it to your radio.
You can still copy-and-paste the work you did on you generic tab to your KG-UV8D tab. It will probably need some settings tweaked, though.
Jim KC9HI. _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com