Spent the last half hour loading the liveCD version and could only get an error "Could not configure port". It did not detect my cable and guessed at 0. This pos (radio, etc) may just go back to Amazon. Thought I could go cheap after seeing the reviews.... guess not...
On Sun, Jan 25, 2015 at 6:55 AM, Rick Osgood rposgood@gmail.com wrote:
Thanks for all the suggestions guys... I tried reseating the cable into the laptop on all available usb ports and at best it now forces the ht into transmit mode. To clarify the other point.... I have loaded the old version v3.2.0.0 and will use that if my windows os ever sees the device. I tried on my wifes laptop and same results.
Rick
On Sat, Jan 24, 2015 at 10:54 PM, D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Download the CHIRP live Linux CD.
That is all set up to work. That will confirm the cable works.
I think you have two problems.
Try the Live CD.
David On Jan 24, 2015 9:44 PM, "Malcolm Larkin" malcolm.larkin@icloud.com wrote:
The only time I had an issue, I entered into the devices section of the administrative tools and down rated the default serial speed and haven't had a problem since.
Malcolm Larkin VK2FITH
On 25 Jan 2015, at 11:39, Tony ajd@industrynet.net wrote:
Why are you guys repeating the same thing over and over without actually offering any assistance??
What you said is all true however first you need to get Windows to recognize the cable.
…..Which only requires that you plug it in. No drivers required on any version of windows.
Rick is not even at that point yet!
Once you can see it in device manager you can then load the OLD (2007) drivers (below) and it will work perfect.
Here is the link to the drivers again: https://dl.dropboxusercontent.com/u/188372/prolific.driver/PL2303.332102.zip
-Tony
*From:* chirp_users-bounces@intrepid.danplanet.com [ mailto:chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *John LaMartina *Sent:* Saturday, January 24, 2015 8:22 PM *To:* 'Discussion of CHIRP' *Subject:* Re: [chirp_users] Baofeng cable
If the cable that is being used has a cloned or counterfeit Prolific chip, Windows will load the latest Prolific driver. That driver will recognize the counterfeit chip *and will Fail*. This is by design to discourage counterfeiters. The only way to get around it is to do what Jim suggested. Load a backdated driver. Preferably Win7 Prolific 3.2.0.0 or XP Prolific 2.0.2.1.
The needed drivers and explanation can be found at http://www.miklor.com/COM/UV_Drivers.php Read carefully FAQ 1 and 2 at the bottom of the page also.
I hope this assists.
*From:* chirp_users-bounces@intrepid.danplanet.com [ mailto:chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *Tony *Sent:* Saturday, January 24, 2015 8:09 PM *To:* mikeearls@earthlink.net; 'Discussion of CHIRP' *Subject:* Re: [chirp_users] Baofeng cable
Any version of Windows will recognize the cable.
You don’t need drivers.
*From:* chirp_users-bounces@intrepid.danplanet.com [ mailto:chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *Michael D Earls *Sent:* Saturday, January 24, 2015 7:50 PM *To:* 'Discussion of CHIRP' *Subject:* Re: [chirp_users] Baofeng cable
Tony, you're not helping!
Until the older driver is installed properly, it won't recognize the cable.
Unless every step is followed EXACTLY, the older driver won't be installed.
Take it from someone who was convinced that I had followed every direction, several times.
When you finally do it right, it will work.
Mike Earls
AF5MS
TSRA Life Member
NRA Benefactor Member
*From:* chirp_users-bounces@intrepid.danplanet.com [ mailto:chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *Tony *Sent:* Saturday, January 24, 2015 6:39 PM *To:* 'Discussion of CHIRP' *Subject:* Re: [chirp_users] Baofeng cable
He’s not even at the point where drivers are needed.
He can’t even get Windows to recognize the cable.
Repeating “Read the instructions” over and over without offering any actual advice is a waste of everybody’s time.
C’mon…
-Tony
*From:* chirp_users-bounces@intrepid.danplanet.com [ mailto:chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *Jim Unroe *Sent:* Saturday, January 24, 2015 7:36 PM *To:* Discussion of CHIRP *Subject:* Re: [chirp_users] Baofeng cable
Follow the instructions in the guide step by step to select it. If you don't select it as shown in the guide, Windows will continue to use the latest driver and the programming cable will continue to fail to function properly.
Jim
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-- Rick Osgood 411 Walnut Street #9722 Green Cove Springs, FL 34023