Tone Mode is set to TSQL
P.S. I don't know what the meaning of any of the abbreviation's are
On Sun, Jan 20, 2019 at 1:49 PM Christophe via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Hi Joseph,
Check parameter "Tone mode" on the channel you try to listen, it could cut the sound if this is set other than "None" on CHIRP. if you want more information check RxDTCS information https://chirp.danplanet.com/projects/chirp/wiki/DevelopersToneModes
Christophe
*De :* joe Bonneville isaiahrocks2010@gmail.com *À :* chirp_users@intrepid.danplanet.com *Envoyé le :* Dimanche 20 janvier 2019 19h40 *Objet :* [chirp_users] Newbie BTECH UV-5X3
I have downloaded CHIRP and used to program my radio but after uploading data to my radio the channels are there but I have no sound when it picks up a signal. Any suggestions would be appreciated.
-- Joseph Bonneville C-(802)-289-1299 e-mail: isaiahrocks2010@gmail.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to CHRISTOPHE DUPONT at josepa2mander@yahoo.fr To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joe at isaiahrocks2010@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com