Tried leaving a blank row in chirp, but I loaded to radio, it just moved row below up into blank. Radio is or Search and Rescue, so yes I will want to RX and TX. Wished I could send screenshots of what kenwood columns look like, but message size to big. I'll checkout links below.

thx,

-jm

From: "Jim Unroe" <rock.unroe@gmail.com>
To: "Chirp" <chirp_users@intrepid.danplanet.com>
Sent: Sunday, April 2, 2017 3:09:09 PM
Subject: Re: [chirp_users] Fwd: baofeng 82c

On Sun, Apr 2, 2017 at 5:37 PM, Jim McIver <jmciver@lmtribune.com> wrote:
> Purchased a baofeng uv-82c as a backup for my kenwood tk-2170. Chirp won't
> read the tk-2170 so I am trying to match columns from kenwood program to
> chirp and don't know what goes where. Where can I get help to make the
> baofeng work?
>
> Attached is what I'm up against. Yes, I've read through all I can find about
> the baofeng, but lack the knowledge to know all the terminology. Is there a
> cross reference from kenwood columns to chirp columns?
>
> I think I have rows 0 through 6 correct, but now sure about 7 through 10.
> That's as far as I've gotten. The rest of the rows came from someone's not
> in my area.
>adi
> Q? how can I leave a blank line in the chirp?

I'm not sure you are asking what you want. If you want to leave a
memory empty, don't program it.

>
> Q? Does kenwood QT/DQT Enc go into Chirp ToneSql?

Depends on what you want. If you want to TX a tone and have no receive tone:
Tone Mode: Tone
Tone: {the TX CTCSS tone}

If you want to TX and RX with the same tone:
Tone Mode: TSQL
ToneSql: {the TX/RX tone}

The link for section 6 on this page has some guides and references
including some CHIRP "column" guides.

http://www.miklor.com/COM/UV_CHIRP.php

>
> Q? How do I know if TSQL is correct Tone Mode in Chirp or should I be using
> something else in this column?

Depends. See above comment and guides.

>
> Q? Where do I put the 203.5 from kenwood QT/DQT Dec & QT/DQT Enc in Chirp?

Depend on if you want to TX the tone only or if you want to TX and RX
with the same tone. See above.

>
> thx,
>
> -Jim McIver


Jim kC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jim M at jmciver@lmtribune.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com