Rich,
This might be a clue to a possible diagnostic test. Is it possible to configure your USB cable to use a lower serial port number, say something less than 4? And then give it
a try? Good luck. I am no expert; just repeating superstitious chants and rituals. 73.
Chris KC9AD
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com]
On Behalf Of tom bailey
Sent: Sunday, February 05, 2017 6:53 PM
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Subject: Re: [chirp_users] Has anyone successfully programmed a Kenwood TM-D700 with Chirp?
I use com port 1...My computer doesn't have serial port on the motherboard so I added an inexpencive serial port card.....
KF7AET
-tom-
Point Roberts ACS
THOMAS BAILEY-President
1969 PROVINCE ROAD
POINT ROBERTS, WA 98281
360.945.0773
KF7AET
On Sun, Feb 5, 2017 at 6:16 PM, Not D'Arcy Cain <nbv87@hotmail.com> wrote:
Tom,
What com port did you use? I keep hearing a rumor that Kenwood doesn’t like com port numbers above 4.
Chris KC9AD
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of tom bailey
Sent: Sunday, February 05, 2017 2:36 PM
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Subject: Re: [chirp_users] Has anyone successfully programmed a Kenwood TM-D700 with Chirp?
Rich...I just downloaded to CHIRP from my D700A. I connect my radio directly to a serial port at the back of my computer and when I start the download I set the model number to detect rather than D700.
73
KF7AET
-tom-
Point Roberts ACS
THOMAS BAILEY-President
1969 PROVINCE ROAD
POINT ROBERTS, WA 98281
KF7AET
On Sat, Feb 4, 2017 at 7:54 AM, Rich Holtman <rich.holtman@gmail.com> wrote:
Thank you for relying Mike!
What does it take to get the D-700 to cooperate? I have a new USB-63
cable from RT Systems, downloaded the driver first (and successfully), but I
cannot download any data from the DM-700. Com port is 8. When downloading
from radio, when I click 'OK', nothing happens at all.
I don't know if this is a clue, but the second time I try to download, I
get an error message "could not open port COM8: [Error 5] Access is denied."
It's not like I am inexperienced, I have programmed 2 HT's my Kenwood TM V71-A
dual band mobile successfully in the past on this computer. Hoping to transfer those
channels over through Chirp.
Any ideas of things to try?
Thanks again,
Rich Holtman
rich.holtman@gmail.com
cell 309-256-4272Unlimited text on VerizonWireless - text me!
KD9ANU
On Sat, Feb 4, 2017 at 9:11 AM, Mike Rees <mikekd7cvj@gmail.com> wrote:
Rich,
I have. You connect to the RS-232 port. You might need a gender changer if using a straight serial cable. If dealing with USB get a Kenwood specific cable with a FTDI chipset. The cable that RT Systems sells with there software works perfect all the time.
On Sat, Feb 4, 2017 at 8:00 AM, Rich Holtman <rich.holtman@gmail.com> wrote:
1) Has anyone successfully programmed a Kenwood TM-D700 with Chirp?
2) What cable did you use?
3) Does that cable connect to the 9-pin RS-232 on the radio, or the 6-pin mini DIN connector?
Thank you,
Rich HoltmanKD9ANU
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Mike at mikekd7cvj@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
Mike
kd7cvj
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_usersThis message was sent to Richard Holtman at rich.holtman@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to kf7aet@gmail.com at kf7aet@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to kf7aet@gmail.com at kf7aet@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com