Well,When I want names, I do go to 21, not 22. Hit menu again, that allows for adjustment from freq, channel, name. I then select which of the three I want, then hit menu again to confirm, done. If you’ve installed names for all your frequencies, that process should do it for you.
Second, I don’t know if you are aware of this tid-bit of info or not but, if you do the process I just outlined and, you actually get names, there’s a simple way to also provide the frequency for that name, on the screen too.
First, make sure your up arrow is on the top row. Then, select menu & 21 “names”. Then press menu again to confirm. Done.
Now, push your “A-B” button. Now the arrow is on the bottom row. If you look to the right of the upper row, you’ll see what channel number you have selected while you selected “names”.
Your arrow is presently on the bottom so, press the VFO button to select “channel mode”. Now, using the key board, press in the three numbers that you see to the right of the name you selected. When that comes up, you’ll see what’s selected, either the channel or the frequency for the numbers to match the ones above. Now you have the name, and the frequency of one particular channel, on the screen at the same time.Scott
Sent from Windows Mail
_______________________________________________From: D.J.J. Ring, Jr.
Sent: Sunday, March 31, 2019 9:47 PM
To: chirp_users@intrepid.danplanet.com
Cc: Jardy Dawson
It sounds like you have done your work with CHIRP fine.
Consult your owner's manual and find the section about displaying either 1)channel number, 2) frequency, or 3) channel name.
If you download from radio to CHIRP and see the names, they are there.
Just find the owner's manual. It will tell you,
73
DavidN1EA
On Sun, Mar 31, 2019, 23:28 James Corbin <jamescorbinsd@gmail.com> wrote:
I do. When I clone to my computer all of the names are shown. For some reason when I import back to the radio, only the frequency shows. No name. Not sure what step I am missing.--
On Sun, Mar 31, 2019 at 20:25 Jardy via chirp_users <chirp_users@intrepid.danplanet.com> wrote:
Do you have names entered for those channels?
Jardy Dawson WA7JRDMessage sent through sub space hailing frequencies using the Universal Translator.
How do I switch my Baofeng PC03 from frequency to name? When I go to 21 and 22 for the name, it still only shows frequencies.--
James Corbin______________________________________________________________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at jardy72@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to James at jamescorbinsd@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
James Corbin_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to James at jamescorbinsd@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com