http://trac.chirp.danplanet.com/chirp_daily/daily-20130220

Thanks for the reply. 

The only release I seem to be able to get to off the site is: chirp-daily-20121222-installer.exe.  Are there other versions in other locations?

Doug

 

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe
Sent: Wednesday, February 20, 2013 12:45 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] Baofeng UV-5R+Upload Error

 

Doug,
Use the 0.3.0 stable release or latest daily build and you should be good.
Jim KC9HI

On Feb 20, 2013 12:18 PM, "Doug Gilbert" <dougandsharon@tampabay.rr.com> wrote:

Model: Baofeng UV-5R+

Firmware: BFB297

Driver: Prolilfic 3.2.0.0

Operating System: Windows 7 Service Pack 1

Chirp: Daily Build 20121222

 

I just purchased the UV-5R+ and tried to connect it up to Chirp.  Got through the driver installation and Chirp software install thanks to the documentation provided on MIKLOR.

I am able to Download the radio parameters into Chirp fine – the “Cloning” window pops up and everything appears to show fine.  However after making a frequency change to one channel and trying to Upload the changes back to the radio, I get the message: “Unsupported Firmware Version BFB301 BFB297”.  This happens right after the “Cloning” window pops up.

 

Since there are so many variables to analyze for potential problems, I downloaded the Baofeng VIP software version: V120725 and tried the same scenario - everything seems to work fine there – Download/Upload.

 

Is Firmware Version BFB297 supported yet by CHIRP?

Thanks,

Doug

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users