Bill,
Go to http://www.miklor.com/UV82
Proceed to Manual Keypad Programming.
There you will find Programming Examples and Flowcharts along with an extensive FAQ section.
Using CHIRP, switching from Channel mode to Frequency mode is not necessary.
CHIRP is much quicker and easier if you are not ‘In the Field’.
John
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jack
Sent: Friday, January 09, 2015 8:59 AM
To: 'Bill Bates'; 'Discussion of CHIRP'
Subject: Re: [chirp_users] frequency to chabnnel
I’m new so cannot answer the first question. To start scanning just press the scan key in the lower left corner of the keypad (on the UV-82L, anyway)
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Bill Bates
Sent: Friday, January 09, 2015 12:15 AM
To: chirp_users@intrepid.danplanet.com
Subject: [chirp_users] frequency to chabnnel
GREETINGS TO ALL.
CAN SOMEONE TELL ME IN SIMPLE STEP TERMS HOW TO MOVE A FREQUENCY FROM FREQUENCY MODE TO STORE INTO A CHANNEL OF MY UV8.
NO SPLIT OR CCTSS NEEDED.....A SIMPLE PUBLIC BAND FREQUENCY INTO A CHANNEL.
ALSO HOW DOES ONE BEGIN THE CHANNEL SCAN PROCESS?
The New Year lies before you, like a spotless tract of snow.........Be careful how you tread on it for every mark will show