Reminder… Be aware of FAQ #2 at http://www.miklor.com/COM/UV_Drivers.php
It’ll pop up when you least expect it. :- )
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Rick Osgood Sent: Friday, January 23, 2015 10:15 AM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng BF-F8HP
I have the cable branded Baofeng. I uninstalled the new version and installed v3.2.0.0. Following directions, I unplugged the usb cable, ran the install then plugged the cable back in. Windows did not even see that a new device has been introduced. I had to shave off a little of the connector that plugs into the radio or it would only go in half way. I am sure it is seated fully now....
Help!
On Fri, Jan 23, 2015 at 8:59 AM, Jim Unroe rock.unroe@gmail.com wrote:
On Fri, Jan 23, 2015 at 8:18 AM, Rick Osgood rposgood@gmail.com wrote:
Is this model supported by Chirp or can I select a different model? Windows 7 finally saw the usb connection and it is now listed as an unknown device?
Thanks for the great work!
-- Rick Osgood
From the Supported Radios list on the CHIRP home page...
Baofeng/Pofung BF-F8HP (in daily builds)
If you have a programming cable with a Prolific type chip, be sure to downgrade your installed driver to v3.2.0.0.
http://www.miklor.com/COM/UV_Drivers.php
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users