Ken,
That's not how it works.
The two duplicate requests were deleted because they were duplicates of the first request.
A post saying you are volunteering a radio for a developer to use would NOT be a duplicate, and it's one of TWO things that must happen before a developer will undertake work on it.
Short answer, until someone volunteers a loaner radio, no one will do work on this except in the unlikely occurrence that one of the volunteer programer's happens to have one himself and wants to use CHIRP with it.
Then wait for a volunteer to volunteer.
If you have the talents, consider becoming a volunteer programmer.
73
David N1EA
Only a mere user
It's an unanswered request from 8 years ago, and two duplicate requests were rejected a year later.
It doesn't look like it's likely to happen - I don't see a request for a loaner radio, that a developer is going to take a look into what's involved, etc. AFAIK the FT-270 wasn't a big seller (compared to, say, the FT-60R) or the many permutations of Baofeng radios.
Ken, N2VIP
No need. There's already an issue for this radio:
Martin.
KD6YAM
I suspect as soon as someone loans/donates a radio to a CHIRP programmer to work on support.
Ken
Yaesu FT270 H/H
Greetings, so far I have used CHIRP with 100% success in programming many radios.
What I REALLY need is being able to program the YAESU FT270 Hand Held.
When is one of you brilliant guys going to update CHIRP with this radio?
Thanks
VE7ECJ
Send chirp_users mailing list submissions to
chirp_users@intrepid.danplanet.com
To subscribe or unsubscribe via the World Wide Web, visit
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
or, via email, send a message with subject or body 'help' to
chirp_users-request@intrepid.danplanet.com
You can reach the person managing the list at
chirp_users-owner@intrepid.danplanet.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of chirp_users digest..."
Today's Topics:
1. Re: UV5X Programming issue (White Ranger)
----------------------------------------------------------------------
Message: 1
Date: Sat, 21 Aug 2021 14:33:09 -0500
From: White Ranger <cortchubby20007@gmail.com>
Subject: Re: [chirp_users] UV5X Programming issue
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Message-ID:
<CAP+N95FGwe=VRT21Yd+EiDSjhknL0j_xGhMZqD7PEJXniiT93Q@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Radio should be ON when up or downloading.
Remove the driver and cable program, reboot PC reload driver
SHOULD correct issue. If using aftermarket cable check to see contacts are
CLEAN (*shiny) and fit TIGHTLY into the mike provisioning adapter (Mic
jack) DO NOT touch ANY buttons while programming. Worst case, prior to
programming RESET the radio to factory resets then load your amended
program.
On Thu, Aug 19, 2021 at 2:03 PM Jim Unroe <rock.unroe@gmail.com> wrote:
> Hi Eric,
>
> On Thu, Aug 19, 2021 at 12:47 PM Eric Chopin <echopin27@gmail.com> wrote:
> >
> > UV5XP....
> > However to get CHIRP to see the radio either in the 'Download from
> radio'
> > or 'Upload to radio' ... with the cable plugged in to my PC or my
> MAC, the
> > radio must me switched OFF...then as I select 'Download or upload'
> as I
> > select 'OK' i must immediately switch ON my radio then CHIRP sees it
> and
> > proceeds. If I try to 'Download or upload' with the radio already
> switched
> > on I get the message 'The radio did not respond' as CHIRP cannot see
> it
> > connected.
> > Any suggestions?
> > Thanks
> > VE7ECJ
>
> That sounds like a programming cable/driver issue. Also, to program
> that radio you must choose...
>
> Vendor: Radioddity
> Model: UV-5G
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to cortchubby20007@gmail.com at
> cortchubby20007@gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe@intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210821/b544e8b4/attachment-0001.html
------------------------------
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
End of chirp_users Digest, Vol 152, Issue 12
********************************************
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Tony Ling at tonyg7txu@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Martin Cooper at mfncooper@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com