22 Aug
2020
22 Aug
'20
9:19 p.m.
Thanks for the suggestions, I will apply constant pressure. I never tried starting a program as administrator, it is worth a try.
On August 22, 2020 at 4:11 PM Alan Hill alan.r.hill@gmail.com wrote:
Try making sure you vigorously plug the connector into the radio and hold it in while loading from chirp. Also turn the volume up from minimum. Last resort run chirp as adminstrator. On Sat, Aug 22, 2020, 3:45 PM Charles Gierke < cgierke@cox.net mailto:cgierke@cox.net > wrote: > >On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP. On Friday all I got was the following message: Radio Did Not Respond. I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP. Any suggestions? Thanks Chuck KJ7INT _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Silver Fox at alan.r.hill@gmail.com mailto:alan.r.hill@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com > _______________________________________________chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck at cgierke@cox.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com