Hi Dan and Tom, I tried to log in to send the debug log but it says I'm not authorized with this email address so I attached it here?
I also muddied the waters by trying another recommended driver https://github.com/failberg/osx-pl2303/downloads and now neither driver shows up.
Any instructions on removing these 2 drivers to install your recommended driver.
Thank you again for your attention to my travails. :-)
Geoff MacLean gmaclean@maine.rr.com 207-415-9044
On Mar 16, 2012, at 4:11 PM, Dan Smith wrote:
I use the wouxun and commander programs on the PC
Okay, it may be worth trying chirp on Windows, if you can, just to rule out any issues with the driver on MacOS.
Part of the problem is that the chinese manufacturers regularly make multiple versions of the "same" radio that speak a different language or have subtle differences with no visual markings to distinguish them. If it doesn't work on Windows, then that may be biting us here.
Also, if you could get and send the debug.log from the Mac, that will help us determine if it's not seeing any data from the radio, or if something more detailed is going on.
Instructions for getting your debug log are here:
http://chirp.danplanet.com/projects/chirp/wiki/How_To_Report_Issues
I assume you're using 0.2.0?
-- Dan Smith www.danplanet.com KK7DS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
