Thanks much folks! I think I'm on my way here.

Shon R. Edwards, MA, AG (Czech Republic)

Amateur call: K6QT
1039 N 2575 W
Layton, UT, 84041-7709
USA
Home phone: (801) 444-3445

E-mail: sre.1966@gmail.com

Shon Edwards

715 Strawberry Creek Private Rd.

Bedford, WY 83112
Cell: (307) 248-2104

---------- Forwarded message ----------
From: Jardy Dawson via chirp_users <chirp_users@intrepid.danplanet.com>
Date: Fri, May 20, 2016 at 6:50 AM
Subject: Re: [chirp_users] Problem with reprogramming Wouxun KG-UVD1P
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>

Did you check device manager to see what comm port you were using? Use the same USB port each time. Check the cable driver. If you are using a Prolific cable, roll your driver back to 3.2.0.0.

Jardy Dawson

WA7JRD Ham Radio

Message relayed through The Senior Boston Relay Race baton pass.

On May 20, 2016, at 04:36, Shon Edwards <sre.1966@gmail.com> wrote:

Hello all,

Maybe this has been talked about recently, but can't find a post. I programmed my Wouxun KG-UVD1P (1.25M/2M ver.) a couple of years ago and have tried to use a newer version of CHIRP to update it. When that didn't work, I used a 3.1 version, got the same error (com port error), but not sure why it wouldn't take.

Could anyone please help? Let me know of any other info you need.

Thx,

Shon, K6QT