Jim,

No, I haven't tried the Baofeng factory software yet, but I'll give it a try tonight when I can get to my Windows laptop.

If that works, is there anything you might want me to do with regards to getting an image or tracing something?

If not, do you recommend I do a factory reset and try CHIRP again?

Thanks,
Aubrey

On 04/16/2014 05:38 AM, Jim Unroe wrote:

On Wed, Apr 16, 2014 at 1:07 AM, Aubrey Turner <aubrey.c.turner@gmail.com> wrote:

Ident:
000: aa 01 01 36 01 74 01 04 ...6.t..

It looks like either the memory layout has change or your radio needs reset. This is what the "Ident" should look like.

AA 36 74 04 00 05 20 DD

It is a record of the factory band limits and is the same format for all UV-5R variants since the BFB291 firmware was released.

36 = VHF lower limit of 136 MHz

74 = VHF upper limit of 174 MHz

04 00 = UHF lower limit of 400 MHz

05 20 = VHF upper limit of 520 MHz

And yours looks to me like

aa 01 01 36 01 74 01 04

01 = separator

01 36 = VHF lower limit

01 = separator

01 74 = VHF upper limit

01 = separator

just guessing beyond this point

04 00 = UHF lower limit

01 = separator

05 20 = UHF upper limit

If I am correct, this first part of memory has been expanded and all of the memory mapping afterwords is offset. So even if you got past this "Radio refused clone" error, the settings would be all wrong.

Are you able to get this radio to work with the Baofeng software?

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users