On Thu, Jun 12, 2014 at 4:00 PM, Rohm Thompson <rohmthom@gmail.com> wrote:

Totally green, new user here trying to set up a Baofeng UV-82 to receive only on one UHF channel.  I've had no problem using CHIRP to set up the radio and use it normally but cannot figure out how to disable the transmit function.  I have unchecked the VHF and UHF Tx Enabled check boxes but that didn't stop transmission.  Any hints would be much appreciated.

Rohm Thompson

Rohm,

Jeff is correct.

The "check boxes" for VHF TX Enabled and UHF TX Enabled are equivalent to the settings in the Baofeng VIP software. Changing the settings in CHIRP will not affect the radio because this function is not implemented in the radio. The settings in the OEM software cannot be changed because they are disabled (greyed out). The OEM software does correctly show the changes that have been made by CHIRP. The same goes for the UV-5R and it's many variants.

Jim KC9HI

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users