I don't memorise frequencies.
In my radios, I display the name of the city or the name of the owning club. Frequencies are only for simplex.
On 02 April 2019 at 07:54 Dennis Wage dwage@dwage.com wrote:
One thing to mention. Although naming repeaters and commonly used frequencies can be handy, I have found that most all hams memorize frequencies. So even though I made up a naming convention for my radios so I would quickly know which repeater I was tuned to, I think it's better to display frequencies instead of names. For example: I named 147.015 in Nashville DANAV1. DA = Davidson County, NA = Nashville, V = VHF, 1 2 3 etc. etc. But everyone else refers to it as 015. And at first I never knew what they were talking about till I started memorizing the frequencies instead of my names. 73 DW Dennis M. Wage (W9BOQ) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net/ http://overdubs.net On Mon, Apr 1, 2019 at 5:44 PM Scott Raines < TRUCK28ENG@live.com mailto:TRUCK28ENG@live.com > wrote: > > My reply was to simply allow for a named channel, to also display the frequency for that named channel on the line below it. I never said to use it that way. If one has upwards of say, 100 channels and names, unless you’ve got a photographic memory, that’s gonna be a bit tough to learn and associate all 100 names to all 100 channels, to all 100 frequencies. I only suggested the method I did so one could temporarily associate a name with a frequency.Scott Sent from Windows Mail From: chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com Sent: Monday, April 1, 2019 11:30 AM To: chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com If the scan stops on an active channel, the other vfo won’t change to match. Things will very rapidly get out of sync. Trust me, you will learn very rapidly which frequency goes with each repeater, or what name goes with what frequency , etc. I would just set up your radio with the preference of name, frequency, or channel on each vfo and just leave it at that. Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator. On Apr 1, 2019, at 07:09, Christopher Knowles < cknowles@tiac.net mailto:cknowles@tiac.net > wrote: > > >You say, "don't use both a and b to monitor 1 channel". I assume that means that if I display the name on the top line (a) and the frequency on the bottom line (b), I can only listen to one channel. How about this. Lets say lines 1 and 2 on CHIRP are set to monitor repeaters x and y in Falmouth. It is possible to program CHIRP to scan only certain of the potential 128 channels. If I set up the CHIRP spreadsheet so that the scan only looks at lines 1 and 2, it should simply alternate between the two repeaters. And the two-line display would simply bounce back and forth between repeater x and repeater y. Would that work? Chris Knowles On 4/1/2019 9:41 AM, Jardy via chirp_users wrote: > > > > Use 2 radios, or don’t use both a and b to monitor 1 channel. After a while, you should be able to memorize which is which. On channels I use quite frequently, I name it the frequency. On less used channels, I name it either the call sign of the owner or the location of the repeater. After a while, you won’t need to use both.Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator. On Apr 1, 2019, at 04:17, Christopher Knowles < cknowles@tiac.net mailto:cknowles@tiac.net > wrote: > > > > >I've been using Baofengs for a year now. I have a UV-5RD+, a BF-F9 V2+, and a UV-XR. Since I live on an island in the Atlantic, and my contact with North America is through two repeaters on Cape Cod, I love the dual watch feature. If I program the radio to display the name on the first line and the frequency on the second line, how would I monitor two repeaters and exactly what buttons would I have to push to make that happen? Chris Knowles > > > > > > When I want names, I do go to 21, not 22. Hit menu again, that allows for adjustment from freq, channel, name. I then select which of the three I want, then hit menu again to confirm, done. If you’ve installed names for all your frequencies, that process should do it for you.Second, I don’t know if you are aware of this tid-bit of info or not but, if you do the process I just outlined and, you actually get names, there’s a simple way to also provide the frequency for that name, on the screen too. First, make sure your up arrow is on the top row. Then, select menu & 21 “names”. Then press menu again to confirm. Done. Now, push your “A-B” button. Now the arrow is on the bottom row. If you look to the right of the upper row, you’ll see what channel number you have selected while you selected “names”. Your arrow is presently on the bottom so, press the VFO button to select “channel mode”. Now, using the key board, press in the three numbers that you see to the right of the name you selected. When that comes up, you’ll see what’s selected, either the channel or the frequency for the numbers to match the ones above. Now you have the name, and the frequency of one particular channel, on the screen at the same time. Scott Sent from Windows Mail From: D.J.J. Ring, Jr. mailto:n1ea@arrl.net Sent: Sunday, March 31, 2019 9:47 PM To: chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com Cc: Jardy Dawson mailto:jardy72@yahoo.com It sounds like you have done your work with CHIRP fine. Consult your owner's manual and find the section about displaying either 1)channel number, 2) frequency, or 3) channel name. If you download from radio to CHIRP and see the names, they are there. Just find the owner's manual. It will tell you, 73 David N1EA On Sun, Mar 31, 2019, 23:28 James Corbin < jamescorbinsd@gmail.com mailto:jamescorbinsd@gmail.com > wrote: > > > > > > > I do. When I clone to my computer all of the names are shown. For some reason when I import back to the radio, only the frequency shows. No name. Not sure what step I am missing.> > On Sun, Mar 31, 2019 at 20:25 Jardy via chirp_users < chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com > wrote: > > > > > > > > > > Do you have names entered for those channels? > > > > Jardy Dawson WA7JRD > > Message sent through sub space hailing frequencies using the Universal Translator. > > > > > > On Mar 31, 2019, at 20:17, James Corbin < jamescorbinsd@gmail.com mailto:jamescorbinsd@gmail.com > wrote: > > > > > > > > > > > > > > > How do I switch my Baofeng PC03 from frequency to name? When I go to 21 and 22 for the name, it still only shows frequencies. > > > -- > > > James Corbin > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > chirp_users mailing list > > > chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > This message was sent to Jardy at jardy72@yahoo.com mailto:jardy72@yahoo.com > > > To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com > > > > > > > > > > > > > > _______________________________________________ > > chirp_users mailing list > > chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to James at jamescorbinsd@gmail.com mailto:jamescorbinsd@gmail.com > > To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com > > > > > > > > > > > -- > James Corbin > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net mailto:n1ea@arrl.net > To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com > > > > > > > >
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Christopher Knowles at cknowles@tiac.net mailto:cknowles@tiac.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com > > > > >-- Christopher Allan Knowles, MPA P.O. Box 4632 Vineyard Haven, MA 02568 Website: http://www.tiac.net/~cknowles/ Please find my LinkedIn profile at: https://www.linkedin.com/in/chris-knowles-99aba51a/ Staff Sergeant, United States Air Force, 1970 - 1974 Call Sign: N1CAK - Amateur Extra Class Accredited Volunteer Examiner (VE) > > > >> > > > > _______________________________________________chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com mailto:jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com > > > >_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Christopher Knowles at cknowles@tiac.net mailto:cknowles@tiac.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com > > >-- Christopher Allan Knowles, MPA P.O. Box 4632 Vineyard Haven, MA 02568 Website: http://www.tiac.net/~cknowles/ Please find my LinkedIn profile at: https://www.linkedin.com/in/chris-knowles-99aba51a/ Staff Sergeant, United States Air Force, 1970 - 1974 Call Sign: N1CAK - Amateur Extra Class Accredited Volunteer Examiner (VE) > >> > > _______________________________________________chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com mailto:jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com > > _______________________________________________chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Wage at dwage@dwage.com mailto:dwage@dwage.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com > _______________________________________________chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net