I use one copy for all radios, including a 7900. Same cable, different connector but under Win 10 or Ubuntu.
On 06 May 2018 at 18:40 Mary Graff megraff@gmail.com wrote:
I have a Yaesu FT60R that connects perfectly, but when I try to connect FT7900 I get an error message saying the USB file isn’t found, I’m trying to us the same connection that does work on the FT60r only difference is the cable plugged into the radio. Should I be able to use the software with 2 different radio’s? I can’t confirm or reject if it is the cable. I have tried to install a separate instance of Chirp but I get the same error message “could not open port /dev/cu.usbserial-RT0UYFJC: [Errno 2] No such file or directory: '/dev/cu.usbserial-RT0UYFJC’ yet this is the same connection on the FT60r. I am also using this on a Mac Book high Sierra
Thanks, Mary _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF (was KC8NHF 9H3GN), e-mail nigel@ngunn.net www http://www.ngunn.net Member of ARRL, QRPARCI #11644, SOC #548, Flying Pigs QRP Club International #385, Dayton ARA #2128, AMSAT-NA LM-1691, GCARES, EAA382.