W0OFK on 146.73 (-600KHz) uses 131.8 on both TX and RX

W0OFK on 444.250 (+5MHz) uses 88.5 on RX only.

That's how 88.5 was injected into the confusion, it's a different repeater.

You could use T (tone) with the right frequency for either. C (CTCSS) is optional.

73
Danny, K5CG
HH 550-000-0609
SKCC 14257

From: "K0LNY ??" <glenn@ervin.email>
To: "chirp users" <chirp_users@intrepid.danplanet.com>
Sent: Thursday, October 12, 2023 1:05:37 PM
Subject: [chirp_users] R-tone and C-tone

Hi,

My local repeater uses 131.8 for a PL tone.

I at one point had 88.5 in one place and 131.8 in the other.

So I changed both to 131.8, and it seems that it should still work, but it isn't keying the repeater.

I'm guessing the R in r-tone is for repeater, and the C in C-tone is CTCSS?

Anyway, which one of these is the repeater wanting to hear to open up?

Thanks.

Glenn

A man with a clock always knows what time it is.
A man with two clocks is never sure.
-- A derivative of Segal's law

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Danny at k5cg@hamoperator.org
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com