Oops... Wrong link.
Bret's is the correct link. John K3NXU
----- Sent via iPadX
On Feb 1, 2013, at 8:13 AM, John LaMartina ☀ JohnLa@usa.net wrote:
Ken, This link might assist http://www.miklor.com/uv5r/UV5R-CTCSS.html John K3NXU
Uv5r Tech Assistance can be found at Http://www.miklor.com/uv5r
Sent via iPadX
On Jan 31, 2013, at 10:22 PM, "Ken G" kdubya@iinet.net.au wrote:
I have the same problem. We need the access tone they’ve set to open the squelch. I can’t find any one where I work (I volunteer at a museum) who knows what the tone is.
Ken G
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Harvey Iri Sent: Thursday, 31 January 2013 10:52 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] UV5R
Hello
I am having a small issue I tries to program my UV5R with the frequencies of my job and I cannot transmit on them, all it does is receive my co-workers, but no transmit. On my repeaters it works fine. the frequencies in question are in the 161 MHZ and 162 MHZ range. I used the Baofeng Software, and did not work. So then I used the Chirp and was able to put it on the radio but again no transmit. Version on my radio is the older version. If there is any other software I can use to unlock those 2 frequencies let me know, if you have any questions for more information just email me.
Thanks, Harvey.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users