Linux is ttyusb00
-------- Original message -------- From: Tim Lavoie tim.lavoie@gmail.com Date: 5/12/18 15:26 (GMT-06:00) To: chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] New user, and question on diagnosing new radio
On a related note, this radio/cable shows up not as a serial port, but as HID (human interface device) class. For example, I see this on Linux (from syslog): hid-generic 0003:15A2:0073.0001: hiddev0,hidraw0: USB HID v1.00 Device [FREESCALE SEMICONDUCTOR INC. MCU MOUSE DEMO] on usb-0000:00:14.0-6/input0 Or from lsusb: Bus 001 Device 006: ID 15a2:0073 Freescale Semiconductor, Inc.
Chirp appears to be expecting only tty ports
On 2018-05-12 12:56 AM, John LaMartina wrote:
The digital version of the Baofeng is not supported by CHIRP.
John
http://www.miklor.com/DMR/ Http://www.miklor.com
On May 12, 2018, at 3:24 AM, Matthieu Lochey mat@lochey.eu wrote:
Hi Amnon Zohar It's not the same radio. This new one have: Mode DMR, TDMA, Tier 2, 2 TimeSlot.
Le 12/05/2018 à 09:05, Amnon Zohar a écrit : you could have bought the same radio for much less
https://www.aliexpress.com/item/BAOFENG-UV-5R-Walkie-Talkie-UHF-VHF-Dual-Ban... https://www.ebay.com/itm/1pcs-Baofeng-UV-5R-VHF-UHF-400-520Mhz-Two-way-Radio...
2018-05-12 9:29 GMT+03:00 Tim Lavoie <tim.lavoie@gmail.com mailto:tim.lavoie@gmail.com>:
Hello all,
Call me new to everything - brand new ham (VA7TJL), new Chirp user, and have a new radio. I've read docs, but please let me know if the questions are too dumb.
I've picked up a Baofeng DM-5R, V3 as seen here: https://www.fleetwooddp.com/products/pre-order-baofeng-dm-5r-v3-2018-digital... https://www.fleetwooddp.com/products/pre-order-baofeng-dm-5r-v3-2018-digital-dmr-dual-band-amateur-ham-radio
It shows up as BF-5R on the boot screen, but neither that nor DM-5R are listed as supported. I did see though that there are other Baofeng radios under new and unusual names, that might be supported as a variant of one that is known. If there is a way to tell if this is the case, I'm open to suggestions.
The Windows software from the manufacturer does detect and read the config from the radio, but the USB device (radio with supplied cable) shows up in settings Win 10 settings as, "MCU MOUSE DEMO", under the "Bluetooth and other Devices" section. When I try to read from the radio in Chirp, there is nothing shown under Ports in the drop down. I can select Baofeng as the vendor, and a number of other models are listed. Similarly, under Linux (current x64 Mint, based on Ubuntu) , there is no known port that the software is looking for.
Ideas?
Cheers, Tim
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to amnon at amnon.zohar@gmail.com mailto:amnon.zohar@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com