The Roger beep must be off in Ham Bands. It is used in the FRS bands and transmitted when you un-key the radio. When you have 2 repeaters with input Pl tones you must set the frequency for each one with the T-CTS set for each input PL. If either repeater has a tone output you would use the R-CTS on it as well. You can run the T-CTS and R-CTS independently.
Ex: ch 1 145.130 T-CTS 100.0
ch 2 145.130 T-CTS 123.0
if they have PL tone Output
ex: ch 1 145.130 T-CTS 100.0 R-TCS 91.5
ch 2 145.130 T-CTS 123.0 R-CTS 88.5
hope this helps you out.
Brad NK8J
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of kf8sj@aol.com Sent: Monday, August 05, 2013 12:27 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] UV5R roger beep/durability
will someone explain sequence of roger beep to me. where in transmission is it sent. have unusual situation with two repeaters in somewhat proximity to each other. common output frequency, but different input pl tones.. would like to identify that inout is on one of the two.
klutzy me has dropped radio numerous times. on wood floor, concrete sidewalk, and in the grass. each time it came up working. on last sidewalk drop, clip on back flew apart, and battery popped off. put it back together, and it worked well. added small amount of jb weld to the spring, and pin ends, no more problems. have since fired up seven more units, all with the jb weld mod.
this is one rugged little beast. love the rascal. wifey calls it my "TOY' cost a hella of a lot less than the last ht's i bought, can't see why she is cmplaining. maybe i shold not take it to bed with me?
73 jim kf8sj
____________________________________________________________
____________________________________________________________ One Weird Trick Could add $1,000s to Your Social Security Checks! See if you Qualify… http://thirdpartyoffers.juno.com/TGL3131/52004da844a514da72439st04vuc