On Mar 24, 2018, at 4:53 PM, Neil Katin <chirp@askneil.com> wrote:_______________________________________________Errno 2 is "file not found". I suspect you do not have the correct name for the USB Serial Port for your programming cable, or your cable doesn't have a driver.
To diagnose the situation to the next step: look for files that start with /dev/tty.usb before and after you plug in your programming cable:
You will typically have one device after the 2nd 'ls' command. That is the name you need to give to chirp.<open a Terminal window> ls /dev/tty.usb* <plug in your programming cable> ls /dev/tty.usb*
If you have no tty.usb files show up: you have a device driver issue. To diagnose further, you will need the device vendor and product numbers. The 'ioreg' or 'system_profiler' command can show you this:
Once again: you are running the command twice to look for what changed after you plugged in the cable.<open a Terminal window> <unplug the programming cable> system_profiler SPUSBDataType <plug in the programming cable> system_profiler SPUSBDataType <ioreg alternative to system_profiler:> ioreg -p IOUSB -l -w 0
The fields you want from system_profiler are the Vendor and Product IDs; that will say what driver is needed.
My Mac has built-in drivers for FTDI chips, not not the Prolific chips (Vendor 067b, product 2303). Drivers are available from the prolific web site.
I hope this helps you get to the next step.
Neil Katin
On 2018-03-21 19:51, T Wilson wrote:
I’m at my wits end with my Mac computer. I’m not versed in the commands using the terminal and I’m not very proficient with a Mac computer either but I’m stuck with it. I have a Baofeng bf-888s and started trying to program it using a generic programming cable with no success. The computer would recognize that something was plugged in but that was it. I bought a legit FTDI cable and now the computer recognizes it with all the information included so I believe that the Mac sees it... but using chirp I get the “errno2” error message when I try to download from the radio! I’ve tried drivers, this, that, and I honestly want to throw this Mac in front of a fast moving truck on the freeway! My Mac is running “high Sierra” 10.13.1 Please help!!!!! _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Neil Katin at chirp@askneil.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jesse at jesse.brown@mac.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com