CHIRP isn't going to know what radio you have unless you read from the radio first. Then you can find out if the frequency is supported or not. Jardy Dawson WA7JRD Ham Radio
Sent by hurling dead pigeons over the wall by trebuchet.
From: Simon Rodda simon@simonrodda.com To: chirp_users@intrepid.danplanet.com Sent: Wednesday, October 14, 2015 7:11 AM Subject: [chirp_users] 70MHz channels
I'm using a TYT 9800, which supports 66-80MHz, I think.
I've been trying to set frequencies within this range, but CHIRP complains that they are out of supported range. I'm guessing that msg comes from CHIRP, not the radio, since it isn't connected at the time.
Regards, SR
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com