Here Here!
And I would add that it is accessible in Linux to the Blind users, something that many other non-free softwares cannot claim.
Glenn
N0YJV
 
----- Original Message -----
From: Erick Reinstedt
To: chirp_users@intrepid.danplanet.com
Sent: Monday, July 31, 2017 12:52 PM
Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK //////////???????????????

I have never taken the time to thank the people who make CHIRP possible, maintain it, answer my questions, etc. and this seemed like a good time to say that you are appreciated, that you have blessed me, you have been patient with my ignorance, you have given me a product that I couldn't have afforded otherwise, and you have made possible for me something I couldn't have done on my own. Thank you very much. You are wonderful!
Erick Reinstedt, K6YEC
On 7/31/2017 10:29 AM, Mark H. Harris wrote:
The CHIRP software is a great tool, easy to use, and very reliable;  thanks to those who develop and maintain CHIRP !



On Mon, Jul 31, 2017 at 9:17 AM, John Kemker <kemkerj3@gmail.com> wrote:
Y'know, I have heard more than 1 ham claim that chirp is "dangerous" and/or junk, but when pressed, they all either heard it from someone else or they expect the same sort of experience you get when you pay for an integrated solution, like RT Systems.  Chirp works. You have to pay attention to the details like proper cable selection, but it works. It's not an out- of- the box solution. It's more in the spirit of ham radio. 

On Jul 31, 2017 7:37 AM, "Amnon Zohar" <amnon.zohar@gmail.com> wrote:
The cheap cable are not a real problem as long as you use the older driver. Works fine for me

בתאריך 31 ביול' 2017 8:10,‏ "Tom Hayward" <tom@tomh.us> כתב:
On Sun, Jul 30, 2017 at 9:46 PM, Larry Lovell <larry.lovell76@gmail.com> wrote:
>
> I love Chirp and have used it on at least three different radios.  My greatest problem is finding a cable that really works.  Some of the USB to serial cables are defective clones and have cost me a bundle trying to either find or build a good one.  Never had an issue with Chirp.  Thank you for the software.

There are two ways to go with this:

- Buy one good FTDI to DE9 cable and then buy only serial cables for each radio

- Or switch to Linux where there are no driver issues

Tom KD7LXL
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to amnon at amnon.zohar@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com


_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to W5NNH at kemkerj3@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to marcus at harrismh777@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com



--

Kind regards,
Mark H. Harris


_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Erick at reinstedts@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin@cableone.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com