No, : Silicon Labs.
I sent more info in a separate email.
Plus I said I was using both Win10 and Linux. Linux never has given me driver problems!
73 DR N1EA
On Sat, Jan 12, 2019 at 10:37 PM Jardy via chirp_users chirp_users@intrepid.danplanet.com wrote:
Check Device Manager and see if the cable shows to be a Prolific. If it is, roll your driver back to 3.2.0.0. See www.miklor.com for more info on this.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Jan 12, 2019, at 19:22, D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Hi,
I have a Wouxun red colored cable, suddenly it no longer works. I have the Wouxun Windows programming software: Doesn't communicate with radio. CHIRP on Win10 and Arch Linux: Same problem, radio doesn't respond.
It used to work, now suddenly it doesn't work!
Is there some way I can check the USB to double jack (1/8 (3.5mm) and 3/32 inch (2.5mm).
I have a club member with the same cable, but it's been 20 days since he was going to come over to test my cable by substitution.
It's either my transceiver or my cable! Only have one hand held that takes this cable!
I only have a 100 MHz dual trace 'scope and a nice RadioShack 22-812 DMM to test with. So I could capture slower pulses. Probably won't be a good test like substitution of working cable.
I know it's a fairly dumb question but you never know until you ask!
73 David N1EA _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com