On Dec 12, 2012 6:15 PM, "WN6WJN - - Wassim" <wn6wjn@gmail.com> wrote:

Thanks Fred

OK some more information.

I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.

I have the RT Systems USB cable for the FT60-R and an aftermarket USB cable for the UV-5R.

I have installed the drivers for both above cables and verified the COM Port they are using. Both are COM4.

I started CHIRP software, plugged in the RT Systems USB cable, held down the Moni key while turning on the FT60-R and the software responded with an error message stating:

"An Error has occurred. Radio is not responding" with an OK button.

Now I was told by a friend that the FT60-R has a problem conneting for the 1st time, but it will be easier there after. But then what are the tricks that will make it easier to connect the first time?

Thanks

73

Wassim

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users