First you need to clear the channel from whats still on it from last setting . . To Set A Baofeng memory Channel
Press ( menu ) Then pick Item 28 . ( Delete Memory Channel ) Then press Menu Again , Make sure The Display Is on the Number of the channel
You want to replace ,
If it is not , use the arrows to make it be . on the display .
Then again press the menu button and voice will say ( Confirm ) Then press the ( EXIt ) Button .
Now Switch To Frequency Mode . Put the frequency you want to set into the top Display by entering Its Numbers on the key pad .
Make sure all desired settings have been put on the ( Menu ) Then press menu and select ( Memory Channel ) Item 27
Press menu Press the numbers of the channel you want to set . For channel one you need to press zero zero one .
While this is still on The display Press the Menu button Again the voice Say ( Receive Frequency )
Press The Menu button again and The voice will say (Transmit Frequency ) Press Menu Again Voice says Memory Channel Press Exit Button Press The ( Exit ) Button To Confirm Setting .
Now go back to channel Mode And see if your new setting has Been placed into the memory by pressing the up or down arrows . .
If its there go back to frequency mode and set the Menu Items back to what you will need for other channels .
so you can make different settings for each memory and the new Frequency will be on the desired channel Channel numbers . Accordingly
( Note ) - Any settings left on menu must be set separately for each memory channel Unless running a new chirp designator Map .