Thanks, Chance, I'll give everything another try when I come back...


-----Original Message-----
From: Chance Fulton <chance.fulton@gmail.com>
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>; holmziep <holmziep@netscape.net>
Sent: Wed, Feb 26, 2020 5:55 pm
Subject: Re: [chirp_users] Having troubles

I chmod the dev because I can’t rely on dial out to work properly. 

chmod 777 /dev/ttyxxx

On Wed, Feb 26, 2020 at 5:24 PM holmzieN2EXG via chirp_users <chirp_users@intrepid.danplanet.com> wrote:


a
dduser $USER dialout

root@holmzie-All-Series:/home/holmzie# adduser $holmzie dialout
adduser: The group `dialout' already exists.

That's what I got.


-----Original Message-----
From: K 0 L N Y Glenn <glennervin@cableone.net>
To: holmziep <holmziep@netscape.net>; Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Sent: Wed, Feb 26, 2020 5:14 pm
Subject: Re: [chirp_users] Having troubles

Hi, try this:
adduser $USER dialout
HTH.
Glenn
----- Original Message -----
Sent: Wednesday, February 26, 2020 4:09 PM
Subject: Re: [chirp_users] Having troubles

Still learning how to reply to reply:  sorry about duplicates!  OK, Jim, I tried 'em all, (duh) but the /dev/ttyUSB0 makes the most sense.  Now logged in as superuser holmzie#.  Gotta go to Harbor Fright to return a sander, be bk in an hour.  Guess I need the proper syntax for the dialout command thing.

THANKS FOLKS!!
 holmzie N2EXG


-----Original Message-----
From: Jim Unroe <rock.unroe@gmail.com>
To: holmziep <holmziep@netscape.net>; Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Sent: Wed, Feb 26, 2020 3:52 pm
Subject: Re: [chirp_users] Having troubles

On Wed, Feb 26, 2020 at 3:22 PM holmzieN2EXG via chirp_users

<chirp_users@intrepid.danplanet.com> wrote:
>
> Have the Yaesu 857 w/ oem serial cable, then a good FTDI Serial/usb adapter.  Running Linux Mint 19.3.
>
> Got the dreaded error [Errno 13] could not open port /dev/ttyS0: [Errno 13] Permission denied: '/dev/ttyS0'
>
> Searched long and hard, Done everything, Dan and others say to do,  carefully, no luck.  Here's some commands and results:
>
> Pete, N2EXG


Hi Pete,

You are choosing the wrong port. Assuming that your user has been
added to the 'dialout' group, scroll all the way down and choose
"/dev/ttyUSB0".

Jim KC9HI


_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin@cableone.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chance at chance.fulton@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
Chance Fulton
chance.fulton@gmail.com
810.441.5795