Re: [chirp_users] UV-5R Says "Radio did not respond"

Hi Richard,

Since the programming cable already works with your radio, the driver and programming cable must be OK. This means the problem is that you are not getting the plug fully engaged in the radio.

Jim KC9HI

Hi Jim. You are always quick to respond with helpful advice. Thanks!

Yeah, I encountered that plug seating issue with my own UV-5RA so with the UV-5R radio I really put some pressure on the connector - even trimmed the plug. But no joy. So maybe a defective connector on the radio side.

Best,

RD

================================= Richard Dillman, T2-GB-061170 Chief Operator, Coast Station KSM Maritime Radio Historical Society http://www.radiomarine.org =================================