John, 1--BFB297, 2--All Builds of Chirp prior to 20130208 installed/uploaded fine, this is 1st one that's ever gave me a problem.
73s, Bill ----- Original Message ----- From: John LaMartina To: 'Discussion of CHIRP' Sent: Friday, February 08, 2013 2:58 PM Subject: Re: [chirp_users] 20130208 Build
Bill,
What is your firmware release.
This can be found by:
1- Power off the UV5R
2- Press and Hold the 3 Key
3-While holding the 3 Key, Power on the radio
A readout of BFB--- will appear.
John K3NXU
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Bill Gabbard Sent: Friday, February 08, 2013 2:37 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] 20130208 Build
1--After installing Build 20130208 on my Baofeng UV-5RA I get an error while Uploading to the radio from Chirp, that Radio did not respond. I checked for good cable connections, Com Port, all to no avail. Uploading previous Builds were no problem, this is 1st problem I've experienced.
2--Also, when a new Build is issued, an *.asc attachment is included. What is it and I'm unable to open it. What program can open it?
3--How are Bugs reported, I'm newbie to this list so please excuse me.
Thanks,
Bill
------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users