NO you can't
On Mon, May 8, 2017 at 10:34 AM, Tom Consodine via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Any of the 200 memory channels or any VFO frequency can be displayed in any of the four (A B C D) display lines. It isn't four separate banks. You can't force one display line to only show certain channels or bands. You have to select A B C or D then select what channel you want. It's just like the UV-5R or UV-82 with the two (A and B) display lines.
Tom ND5Y
On 05/08/2017 10:12 AM, Brewster wrote:
Let me ask the question another way. Is it possible to put _only_ the frequencies for the different bands in each memory slot? Eg. 144 Mhz in slot A, 220 Mhz. in slot B, GMRS in memory C, and 440 Mhz. in memory D. Why would the factory supply a radio with four different memories, advertized as a different band for each memory? I understand that you can upload all your frequencies into the radio and use the channel knob to go to each frequency, the problem being is all the different memories contain the same channels.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to stan at qslstan@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com