This is a known issue.
Jim KC9HI
On Fri, May 17, 2019, 10:58 PM David C. Jenner via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
I successfully programmed a new BTECH GMRS-50X1 using my older BTECH GMRS-V1 as a basis.
However, it took 4 min and 30 sec to upload to the radio. The first thing I did was read out the 50X1 and write back to it. That upload and all since, with new entries, have taken about the same time, which seems excessively long? I don't see this with other radios.
Latest version of CHIRP on Windows 10 running on Parallels on a MacBook Pro using both BTECH and RT Systems cables. Comm port says it's 9600 baud.
Dave _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jim at rock.unroe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com