Hi David<div><br></div><div>Let me thank you for all the hard work on this.  I appreciated your dedication to this project.  </div><div><br></div><div>I work for a large company in their software part of the world, and I do appreciate that software does have bugs.  So, I have  found a few that might have been discussed, previously, but I thought I would mention them.</div>
<div><br></div><div>I do own the following radios that I can test with:</div><div><br></div><div><ul><li>vx7r</li><li>vx8r</li><li>ic92</li><li>uv5r</li><li>id-800</li><li>ft857</li><li>ft897</li></ul><div>(I need to sell some radios :) )</div>
</div><div><br></div><div>I was playing with the ic92 on the daily build from 2 days ago (04162012).</div><div><br></div><div>I am using a non-chinese usb/rs232 adapter on my RS92 connected to the IC92 on W7 64.</div><div>
<br></div><div>Chirp &#39;seem&#39;s to read all the IC92 data in live mode.  What took me down this path, was that I had some repeater offsets programmed as 0.0000.  When I tried to change them to 5.000, it would not take and the update was not transmitted to the radio.</div>
<div><br></div><div>Previously to this, I was cleaning out the radios memories by highlighting all the SW Broadcast and deleting them with a Shift up.  I believe that completed for the most part (not all memories were deleted).</div>
<div><br></div><div>I then manually edited the offset in the radio, but it is not being read by the software (this is in band B 000).</div><div><br></div><div>Thoughts?  Is there a log I can share with you?</div><div><br>
</div><div>Again, many thanks.  </div><div><br></div><div>Mike va3mw</div><div><br></div><div><br></div>