Hi jm, On Windows there is a Windows tool called snippet. You can use it to select as small a region of the display as you want. I imagine the result would be about 10K if you can use it.
73 ~R~ NE1EE
On 2017-04-02 15:19:-0700, Jim McIver wrote:
Tried leaving a blank row in chirp, but I loaded to radio, it just moved row below up into blank. Radio is or Search and Rescue, so yes I will want to RX and TX. Wished I could send screenshots of what kenwood columns look like, but message size to big. I'll checkout links below. thx, -jm
From: "Jim Unroe" rock.unroe@gmail.com To: "Chirp" chirp_users@intrepid.danplanet.com Sent: Sunday, April 2, 2017 3:09:09 PM Subject: Re: [chirp_users] Fwd: baofeng 82c
On Sun, Apr 2, 2017 at 5:37 PM, Jim McIver jmciver@lmtribune.com wrote:
Purchased a baofeng uv-82c as a backup for my kenwood tk-2170. Chirp won't read the tk-2170 so I am trying to match columns from kenwood program to chirp and don't know what goes where. Where can I get help to make the baofeng work?
Attached is what I'm up against. Yes, I've read through all I can find about the baofeng, but lack the knowledge to know all the terminology. Is there a cross reference from kenwood columns to chirp columns?
I think I have rows 0 through 6 correct, but now sure about 7 through 10. That's as far as I've gotten. The rest of the rows came from someone's not in my area. adi Q? how can I leave a blank line in the chirp?
I'm not sure you are asking what you want. If you want to leave a memory empty, don't program it.
Q? Does kenwood QT/DQT Enc go into Chirp ToneSql?
Depends on what you want. If you want to TX a tone and have no receive tone: Tone Mode: Tone Tone: {the TX CTCSS tone}
If you want to TX and RX with the same tone: Tone Mode: TSQL ToneSql: {the TX/RX tone}
The link for section 6 on this page has some guides and references including some CHIRP "column" guides.
http://www.miklor.com/COM/UV_CHIRP.php
Q? How do I know if TSQL is correct Tone Mode in Chirp or should I be using something else in this column?
Depends. See above comment and guides.
Q? Where do I put the 203.5 from kenwood QT/DQT Dec & QT/DQT Enc in Chirp?
Depend on if you want to TX the tone only or if you want to TX and RX with the same tone. See above.
thx,
-Jim McIver
Jim kC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jim M at jmciver@lmtribune.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to WeatheredSoul at rich.messeder@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com