Add yourself to the groups tty and dialout.
On 2022-10-28 10:27, Julian Macassey wrote:
I am running kubuntu 22.04.1 on a Framework laptop.
I have loaded the daily build from flatpak and Chirp comes up when opened.
My radio is a Baofeng UV-5RV2+
I followed the instructions in:
https://chirp.danplanet.com/projects/chirp/wiki/CSV_HowTo
A Clean Start
If you want to get an empty CHIRP-compatible CSV file, the
easiest way is to let CHIRP create one for you. Here are the
approximate steps for creating an empty file, editing it in an
external editor and opening it back up in CHIRP:
Start CHIRPGo to File > New to create an empty CSV fileAdd a memory to the first row, by entering a frequencysuch as 146.52
Go to File > Export to save the template file to somethingending with a .csv extension
Open the file in your spreadsheet or external application ofchoice, make edits and save
Re-open the file in CHIRP to validate that the format isstill correct, by going to File > Open and choosing your file
Optionally use File > Import to import the contents of yourCSV file into another radio image
...
If you have a clone-mode radio, upload the changes back to your
device using Radio > Upload To Radio. If you are using a
live-mode radio, wait until all of the changes finish
synchronizing back to the device by watching the status bar in
the lower right corner of the main window.
So, when I plug in my radio, I see the following in
/var/logsyslog:
Oct 28 18:07:10 localhost kernel: [218263.636611] usb 3-4: new full-speed USB device number 15 using xhci_hcd Oct 28 18:07:11 localhost kernel: [218264.061760] usb 3-4: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 3.00 Oct 28 18:07:11 localhost kernel: [218264.061769] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Oct 28 18:07:11 localhost kernel: [218264.061772] usb 3-4: Product: USB-Serial Controller Oct 28 18:07:11 localhost kernel: [218264.061775] usb 3-4: Manufacturer: Prolific Technology Inc. Oct 28 18:07:11 localhost kernel: [218264.064089] pl2303 3-4:1.0: pl2303 converter detected Oct 28 18:07:11 localhost kernel: [218264.066251] usb 3-4: pl2303 converter now attached to ttyUSB0 Oct 28 18:07:11 localhost mtp-probe: checking bus 3, device 15: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4" Oct 28 18:07:11 localhost mtp-probe: bus: 3, device: 15 was not an MTP device Oct 28 18:07:11 localhost snapd[13154]: hotplug.go:200: hotplug device add event ignored, enable experimental.hotplug Oct 28 18:07:11 localhost mtp-probe: checking bus 3, device 15: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4" Oct 28 18:07:11 localhost mtp-probe: bus: 3, device: 15 was not an MTP device Oct 28 18:07:13 localhost ModemManager[824]: <info> [base-manager] couldn't check support for device '/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4': not supported by any plugin
In Chirp I select Radio and slide down to select "Upload to Radio".
I get a dialogue box saying:Port /dev/ttyS0, Bofeng, UV5R, I select OK. I get "An error has occurred Could configure port: (5, 'Input/output error')
So just in case, I fiddles with the /dev/ttyS0 permissions:
crw-rw-rw- 1 root dialout 4, 64 Oct 25 11:15 ttyS0
So what have I not done? What should I do?
Yours GM5LUK