The poster, y_61 says that he bought a new cable from Baofeng through Amazon.it, and the cable works fine in Windows but when used with the Chirp Live CD based on Ubuntu with upgraded CHIRP to DAILY CHIRP  (20150102) with GTK 2.24-10   Pyton 2.7.3   PYGTK  2.24.0, connecting the cable results in the Baofeng UV-5R (BFS 297) going into TRANSMIT mode.

The poster, y_61 does not understand why the same cable is working with Windows but not with Ubuntu CHIRP Live CD.
The poster, y_61 does not confirm that the version of CHIRP used on Windows is the same DAILY CHIRP or other.

Does anyone know why the Baofeng UV-5R is going into transmit.

The poster, y_61 does not state at which moment the UV-5R goes into transmit.

David

On Wed, Jan 7, 2015 at 1:52 PM, y_61@libero.it <y_61@libero.it> wrote:

I read in a MIKLOR web site that there are some False usb profilic cable  or  false profilic pl-2303 .

 

I have this  china (clone ? ) cable, buy by amazon :

 

http://www.amazon.it/gp/product/B007VMA6TK?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00

 

In how mode I say if is this cable is a  FTDI, or  Proflic  or PL-2303 or a bad clone ????

 

My  very big problem is that when I used this  clone cable buy by amazon on windows xp

All ok, I read and write on my baofeng  UV-5R

 

But when I use a live cd with ubuntu and CHIPR  (update today !!! ) version is now:

 

DAILY  (20150102)  GTK 2.24-10   Pyton 2.7.3   PYGTK  2.24.0

 

The problem is that with ubuntu (linux distro ) the cable not work and the baofeng always go to TX !

 

Why it work well  on windows xp , but not work with Chirp on ubuntu  live cd distro ????

 

Thanks for help.

 

 

PS the version on my baofeng UV-5R  is  BFS 297 buy on july 2014.






----Messaggio originale----
Da: y_61@libero.it
Data: 26-dic-2014 10.42
A: <y_61@libero.it>
Ogg: I: Re: [chirp_users] Who used CHIRP in linux ubuntu mode ?



----Messaggio originale----
Da: y_61@libero.it
Data: 24-dic-2014 10.23
A: <y_61@libero.it>
Ogg: Re: [chirp_users] Who used CHIRP in linux ubuntu mode ?



----Messaggio originale----
Da: n1ea@arrl.net
Data: 23-dic-2014 14.46
A: "y_61@libero.it"<y_61@libero.it>
Ogg: Re: R: Re: R: Re: Re: R: Re: [chirp_users] Who used CHIRP in linux ubuntu mode ?

What version of chirp are you using?

David

On Dec 23, 2014 8:00 AM, "y_61@libero.it" <y_61@libero.it> wrote:

yes, after  installal chiro on usb boot pen, i updateat the last issue of chirp via internet....


an  ham-radio say that  this TX on cable connection is a known issue.... its true ?

the solution ?

help me.,,, best 73


----Messaggio originale----
Da: n1ea@arrl.net
Data: 22-dic-2014 21.04
A: "y_61@libero.it"<y_61@libero.it>
Ogg: Re: R: Re: Re: R: Re: [chirp_users] Who used CHIRP in linux ubuntu mode ?

Are you using the latest daily build?

Tell me what version.  Do NOT program with anything except the latest raily build.

David

On Dec 22, 2014 2:07 PM, "y_61@libero.it" <y_61@libero.it> wrote:
ok i update, now chirp is ok .



Hi, arrived the new cable and now the  uv-5r is programmed !

 

The old cable is dead !

 

when I use this new cable with windows , all ok it read and program the memories,

but if I use the CHIRP on boot  in Ubuntu, when I connect to the usb port this cable

the RTX go on  TX !!!

 

why ? remember that I use it on windows all ok, help me, best 73






----Messaggio originale----
Da: n1ea@arrl.net
Data: 11-dic-2014 20.43
A: "y_61@libero.it"<y_61@libero.it>
Ogg: Re: Re: R: Re: [chirp_users] Who used CHIRP in linux ubuntu mode ?

Not yet.

Upgrade CHIRP to the latest DAILY BUILD - this is important.

In terminal do this - each line is a command.
sudo apt-add-repository ppa:dansmith/chirp-snapshots
sudo apt-get update
sudo apt-get install chirp-daily
After chirp-daily is installed, run it.

ONLY then can you program your radio.  If you do not use the daily build you will have problems.


To run the program you can type chirp-daily and it will run.

David


On Thu, Dec 11, 2014 at 2:33 PM, y_61@libero.it <y_61@libero.it> wrote:

ok i downlod the iso and create the boot on usb...

now, i connect the cable to programm into the usb port and ?


there is some works to function the cable to chirp or none ?


73



----Messaggio originale----
Da: n1ea@arrl.net
Data: 10-dic-2014 20.44
A: "y_61@libero.it"<y_61@libero.it>
Ogg: Re: R: Re: [chirp_users] Who used CHIRP in linux ubuntu mode ?

I have twice sent you the link for the iso.

Download Unetbootin anr use the iso I sent you twice before.

Make sure you upgrade to latest daily build of CHIRP if you have Baofeng radio.

CHIRP is available for Windows also.

David

On Dec 10, 2014 2:18 PM, "y_61@libero.it" <y_61@libero.it> wrote:



sorry i am not expert ?  please send to me the link to download the chirp  ISO to usb pen boot ?


help me.... 73

----Messaggio originale----
Da: n1ea@arrl.net
Data: 9-dic-2014 22.19
A: "y_61@libero.it"<y_61@libero.it>
Ogg: Re: [chirp_users] Who used CHIRP in linux ubuntu mode ?

See this message for iso.  IMPORTANT read #2 link about UV5R first.

David

On Dec 8, 2014 6:10 PM, "David Ranch" <chirp@trinnet.net> wrote:

Try out Andy's HamRadio ISO:

     http://sourceforge.net/projects/kb1oiq-andysham/

It has Chirp pre-installed but you'll probably want to upgrade it before
you run it.  After that, just follow the Chirp documentation.  Since
you're using a UV-5R, see:

     http://www.miklor.com/COM/UV_CHIRP.php

--David




On 12/08/2014 02:06 AM, y_61@libero.it wrote:
> Hi,  sorry i have a  baofeng UV-5R   release BFS 297… ( july 2014 i buy )
>
>
>
> I whant yo  create a  CHIRP on usb pen boot  , I think is work on ubuntu or
> linux ?
>
> PLEASE In  how mode I create it ?
>
> I have the programm unebootin for create with the ISO the boot chirp on the
> Usb pen.
>
> But, where I downoad the CORRECT  ISO immage for my  baofenf UV-5R
> BFS 297 version ?
>
> I use a comunication cable buy on amazon ( I think is a clone ) in this case
> with NO use windows but linux…no driver is request ?
>
> VERY IMPORTANT , after the boot whith this chirp on usb pen drive in linux,
> what I to do to install the driver or start the comunication for the cable to
> my pc ???
>
> Or I insert the cable in a usb port and is finish ? I oper the chirp program
> and select in “radio” and read the data memory ?
>
> Thanks for help, best 73
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users