On Thu, 25 Mar 2021 at 20:24, zeb doz <zardoz123456@gmail.com> wrote:

Hello everyone! Where online or what book can I get a good study guide so that I may obtain my license

Sent from my iPhone

> On Mar 24, 2021, at 2:01 PM, chirp_users-request@intrepid.danplanet.com wrote:
> Send chirp_users mailing list submissions to
> chirp_users@intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
> chirp_users-request@intrepid.danplanet.com
>
> You can reach the person managing the list at
> chirp_users-owner@intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
> 1. Re: chirp_users Digest, Vol 147, Issue 8 (Jim Self)
> 2. Re: chirp_users Digest, Vol 147, Issue 8
> (Nigel A. Gunn G8IFF/W8IFF)
> 3. WinXP issue (JP Bernier)
> 4. Re: WinXP issue (John Mehl)
> 5. Re: WinXP issue (Jim Unroe)
> 6. Re: WinXP issue (JP Bernier)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 23 Mar 2021 15:35:57 -0400
> From: Jim Self <jimself1954@gmail.com>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 147, Issue 8
> To: chirp_users@intrepid.danplanet.com
> Message-ID:
> <CAO6L+xETgEai6VJ_2DH6=pjbrFz9BbvvHDM0+kjy4igOtZWDGQ@mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Please remove me from your mailing list.
>
> Turn Social Media and TV News off and all of the pain in the world goes
> away. You're welcome.
>
>> On Tue, Mar 23, 2021, 3:01 PM <chirp_users-request@intrepid.danplanet.com>
>> wrote:
>>
>> Send chirp_users mailing list submissions to
>> chirp_users@intrepid.danplanet.com
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> or, via email, send a message with subject or body 'help' to
>> chirp_users-request@intrepid.danplanet.com
>>
>> You can reach the person managing the list at
>> chirp_users-owner@intrepid.danplanet.com
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of chirp_users digest..."
>>
>>
>> Today's Topics:
>>
>> 1. Re: I get an "unknown file format" when importing (Eric Oyen)
>> 2. Re: Chirp does not work on my Baofeng UV-5R radio, I am
>> deleting the program!!! (Eric Oyen)
>> 3. Re: I get an "unknown file format" when importing
>> (D.J.J. Ring, Jr.)
>> 4. Help - Programing ICOM handheld IC-2GXET and IC-T7E (Allan Carson)
>> 5. Re: I get an "unknown file format" when importing
>> (Nigel A. Gunn G8IFF/W8IFF)
>> 6. Re: I get an "unknown file format" when importing (Glenn K0LNY)
>> 7. Re: I get an "unknown file format" when importing
>> (Nigel A. Gunn G8IFF/W8IFF)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Mon, 22 Mar 2021 23:08:39 -0700
>> From: Eric Oyen <eric.oyen@icloud.com>
>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>> To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
>> Message-ID: <2AE0C6B1-6700-4F63-95B9-9AE5F55B5E8F@icloud.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> One good way I have found to edit CsV files is to use a spreadsheet
>> program like Microsoft excel or one of the linux free variants. Simply
>> import as a cSV, do your editing, then export back to a CSV file. Compare
>> the original to the new edited version to make sure the same number of
>> commas are in place on the right lines. BTW, I have already tried this on
>> my windows box using excel and a program specifically designed for the
>> Baofeng radio. So, it should work the same way with chirp as both that
>> program and cHIRP should read or write CSV files in the same way.
>>
>> DE n7zzt Eric
>>
>>
>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe@gmail.com> wrote:
>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>> <chirp_users@intrepid.danplanet.com <mailto:
>> chirp_users@intrepid.danplanet.com>> wrote:
>>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>>> Steps I?ve taken:
>>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>>> Exported memories to a CSV file
>>>> Added the new frequencies to the CSV file
>>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file
>> format message
>>>> What am I missing?
>>>> Thanks for any help!
>>>> Steve
>>>> KF0CPV
>>> How did you edit the CSV file?
>>> What did you change?
>>> Did you compare the new CSV file to the original file CSV file using a
>>> text editor?
>>> Attach both the before and after CSV files to this conversation so
>>> that they can be reviewed.
>>> The most common cause of trouble is...
>>> - The data format of a cell was changed.
>>> - The number of commas required at the end of a data row was changed.
>>> Jim KC9HI
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users@intrepid.danplanet.com <mailto:
>> chirp_users@intrepid.danplanet.com>
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>>> This message was sent to Eric Oyen at eric.oyen@icloud.com <mailto:
>> eric.oyen@icloud.com>
>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe@intrepid.danplanet.com <mailto:
>> chirp_users-unsubscribe@intrepid.danplanet.com>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210322/3920f6a7/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Mon, 22 Mar 2021 23:20:55 -0700
>> From: Eric Oyen <eric.oyen@icloud.com>
>> Subject: Re: [chirp_users] Chirp does not work on my Baofeng UV-5R
>> radio, I am deleting the program!!!
>> To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
>> Message-ID: <2CCC8A7E-37EB-4E2F-AD10-2E1AEC656EC5@icloud.com>
>> Content-Type: text/plain; charset=us-ascii
>>
>> Well, it certainly is handy to have the extra links. Always convenient to
>> have local copies just in case. :)
>>
>> DE N7zzt Eric
>>
>>
>>>> On Mar 19, 2021, at 4:45 AM, Jim Unroe <rock.unroe@gmail.com> wrote:
>>> On Fri, Mar 19, 2021 at 12:39 AM Glenn K0LNY <glennervin@cableone.net>
>> wrote:
>>>> I only program my UV 5R with Chirp in Linux.
>>>> Glenn
>>> My guess would be that is because your programming cable has a
>>> Prolific type USB-to-Serial chip.
>>> For Windows you would need to download and install the older Prolific
>>> v3.2.0.0 device driver.
>>> https://www.miklor.com/COM/UV_Drivers.php
>>> For macOS you would have to purchase a 3rd party device driver
>>> (Catalina and earlier. No Big Sur support yet.).
>>> https://www.mac-usb-serial.com/
>>> Linux doesn't need this extra bit of TLC because the device drivers
>>> are open source (and don't come from the Prolific company).
>>> Jim KC9HI
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users@intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Eric Oyen at eric.oyen@icloud.com
>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe@intrepid.danplanet.com
>>
>>
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Tue, 23 Mar 2021 02:59:47 -0400
>> From: "D.J.J. Ring, Jr." <n1ea@arrl.net>
>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>> To: Eric Oyen <eric.oyen@icloud.com>, Discussion of CHIRP
>> <chirp_users@intrepid.danplanet.com>
>> Message-ID:
>> <CADO5RbjSUHQBUygWF+3L6u2pTT1=
>> m9ycOgAX18WuFLV+bDW_aA@mail.gmail.com>
>> Content-Type: text/plain; charset="UTF-8"
>>
>> If I'm not mistaken, there was an issue of Microsoft Excel not editing
>> the csv files correctly and when opening such a file up and saving it
>> again, it introduced errors.
>>
>> Such errors did NOT occur with the use of LibreOffice (or OpenOffice)
>> which is available for Windows, Mac OX-X, and Linux.
>>
>> OpenOffice download: https://www.openoffice.org/download/
>> LibreOffice download: https://www.libreoffice.org/download/download/
>> (currently out of order)
>> LibreOffice download:
>> http://mirror.internode.on.net/pub/libreoffice/stable/7.1.1/
>>
>> If Microsoft Excel no longer introduces errors, someone please correct me.
>>
>> 73
>>
>> DR
>> N1EA
>>
>>
>>
>>> On Tue, Mar 23, 2021 at 2:10 AM Eric Oyen via chirp_users
>>> <chirp_users@intrepid.danplanet.com> wrote:
>>> One good way I have found to edit CsV files is to use a spreadsheet
>> program like Microsoft excel or one of the linux free variants. Simply
>> import as a cSV, do your editing, then export back to a CSV file. Compare
>> the original to the new edited version to make sure the same number of
>> commas are in place on the right lines. BTW, I have already tried this on
>> my windows box using excel and a program specifically designed for the
>> Baofeng radio. So, it should work the same way with chirp as both that
>> program and cHIRP should read or write CSV files in the same way.
>>> DE n7zzt Eric
>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe@gmail.com> wrote:
>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>> <chirp_users@intrepid.danplanet.com> wrote:
>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>> Steps I?ve taken:
>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>> Exported memories to a CSV file
>>> Added the new frequencies to the CSV file
>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file
>> format message
>>> What am I missing?
>>> Thanks for any help!
>>> Steve
>>> KF0CPV
>>> How did you edit the CSV file?
>>> What did you change?
>>> Did you compare the new CSV file to the original file CSV file using a
>>> text editor?
>>> Attach both the before and after CSV files to this conversation so
>>> that they can be reviewed.
>>> The most common cause of trouble is...
>>> - The data format of a cell was changed.
>>> - The number of commas required at the end of a data row was changed.
>>> Jim KC9HI
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users@intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Eric Oyen at eric.oyen@icloud.com
>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe@intrepid.danplanet.com
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users@intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net
>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe@intrepid.danplanet.com
>>
>>
>> ------------------------------
>>
>> Message: 4
>> Date: Tue, 23 Mar 2021 12:23:15 +0200
>> From: Allan Carson <amcarson1000@gmail.com>
>> Subject: [chirp_users] Help - Programing ICOM handheld IC-2GXET and
>> IC-T7E
>> To: chirp_users@intrepid.danplanet.com
>> Message-ID:
>> <CANheJuSYdcmWorN0sQ_Rcyf6H_G05afhNBtOiAWU=
>> HqQWP52rg@mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Hi Chirp,
>>
>> Great job you guys are doing there - thanks!
>>
>> Can you please give me some help - I have a multi-function JiYKR cable
>> to program my radios, but I can't seem to be able to get in to change or
>> save any of the settings when I use the 'live' mode on Chirp. Could you
>> give me some info on how to use the live mode and or suggest any other
>> versions that I can use to program the IC-2GXET and IC-T7E?
>>
>> Thanks for your help
>>
>> 73
>>
>> Allan - ZS1AL
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/e09b712b/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 5
>> Date: Tue, 23 Mar 2021 08:45:46 -0400 (EDT)
>> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel@ngunn.net>
>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>> To: Eric Oyen <eric.oyen@icloud.com>, Eric Oyen via chirp_users
>> <chirp_users@intrepid.danplanet.com>
>> Message-ID: <1798531439.157211.1616503546336@email.ionos.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> The best way is not to use CSV files at all.
>>
>>> On 23/03/2021 02:08 Eric Oyen via chirp_users <
>> chirp_users@intrepid.danplanet.com> wrote:
>>> One good way I have found to edit CsV files is to use a spreadsheet
>> program like Microsoft excel or one of the linux free variants. Simply
>> import as a cSV, do your editing, then export back to a CSV file. Compare
>> the original to the new edited version to make sure the same number of
>> commas are in place on the right lines. BTW, I have already tried this on
>> my windows box using excel and a program specifically designed for the
>> Baofeng radio. So, it should work the same way with chirp as both that
>> program and cHIRP should read or write CSV files in the same way.
>>> DE n7zzt Eric
>>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <
>> rock.unroe@gmail.com mailto:rock.unroe@gmail.com > wrote:
>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via
>> chirp_users
>>>> <chirp_users@intrepid.danplanet.com mailto:
>> chirp_users@intrepid.danplanet.com > wrote:
>>>>>>> ?m trying to import a csv file into
>> CHIRP to upload back to my radio.
>>>>> Steps I?ve taken:
>>>>> Connected radio to CHIRP and downloaded the memories to
>> CHIRP
>>>>> Exported memories to a CSV file
>>>>> Added the new frequencies to the CSV file
>>>>> Saved CSV and tried to import back to CHIRP bur getting
>> an unknown file format message
>>>>> What am I missing?
>>>>> Thanks for any help!
>>>>> Steve
>>>>> KF0CPV
>>>>>>> How did you edit the CSV file?
>>>> What did you change?
>>>> Did you compare the new CSV file to the original file CSV file
>> using a
>>>> text editor?
>>>> Attach both the before and after CSV files to this
>> conversation so
>>>> that they can be reviewed.
>>>> The most common cause of trouble is...
>>>> - The data format of a cell was changed.
>>>> - The number of commas required at the end of a data row was
>> changed.
>>>> Jim KC9HI
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users@intrepid.danplanet.com mailto:
>> chirp_users@intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Eric Oyen at eric.oyen@icloud.com
>> mailto:eric.oyen@icloud.com
>>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe@intrepid.danplanet.com mailto:
>> chirp_users-unsubscribe@intrepid.danplanet.com
>>> _______________________________________________ chirp_users mailing
>> list chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
>> was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an
>> email to chirp_users-unsubscribe@intrepid.danplanet.com
>>
>>
>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www
>> http://www.ngunn.net
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/6698180b/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 6
>> Date: Tue, 23 Mar 2021 10:37:38 -0500
>> From: "Glenn K0LNY" <glennervin@cableone.net>
>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>> To: "Discussion of CHIRP" <chirp_users@intrepid.danplanet.com>
>> Message-ID: <0a9b01d71ffa$7528c450$7001a8c0@NUCPPYH>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Well from the perspective of a screenreader user, I find editing things
>> much easier to make changes in a spreadsheet program outside of Chirp and
>> import them after the changes were made, so I would call that, the better
>> way.
>> Glenn
>>
>> ----- Original Message -----
>> From: Nigel A. Gunn G8IFF/W8IFF
>> To: Eric Oyen ; Eric Oyen via chirp_users
>> Sent: Tuesday, March 23, 2021 7:45 AM
>> Subject: Re: [chirp_users] I get an "unknown file format" when importing
>>
>>
>> The best way is not to use CSV files at all.
>> On 23/03/2021 02:08 Eric Oyen via chirp_users <
>> chirp_users@intrepid.danplanet.com> wrote:
>>
>>
>>
>>
>> One good way I have found to edit CsV files is to use a spreadsheet
>> program like Microsoft excel or one of the linux free variants. Simply
>> import as a cSV, do your editing, then export back to a CSV file. Compare
>> the original to the new edited version to make sure the same number of
>> commas are in place on the right lines. BTW, I have already tried this on
>> my windows box using excel and a program specifically designed for the
>> Baofeng radio. So, it should work the same way with chirp as both that
>> program and cHIRP should read or write CSV files in the same way.
>>
>>
>> DE n7zzt Eric
>>
>>
>>
>>
>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe@gmail.com> wrote:
>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>> <chirp_users@intrepid.danplanet.com> wrote:
>>
>>
>> ?m trying to import a csv file into CHIRP to upload back to my
>> radio.
>>
>>
>>
>> Steps I?ve taken:
>>
>>
>>
>> Connected radio to CHIRP and downloaded the memories to CHIRP
>> Exported memories to a CSV file
>> Added the new frequencies to the CSV file
>> Saved CSV and tried to import back to CHIRP bur getting an unknown
>> file format message
>>
>>
>>
>> What am I missing?
>>
>>
>>
>> Thanks for any help!
>>
>>
>>
>> Steve
>>
>> KF0CPV
>>
>>
>> How did you edit the CSV file?
>> What did you change?
>> Did you compare the new CSV file to the original file CSV file using a
>> text editor?
>> Attach both the before and after CSV files to this conversation so
>> that they can be reviewed.
>>
>> The most common cause of trouble is...
>>
>> - The data format of a cell was changed.
>> - The number of commas required at the end of a data row was changed.
>>
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Eric Oyen at eric.oyen@icloud.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe@intrepid.danplanet.com
>>
>>
>> _______________________________________________ chirp_users mailing list
>> chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
>> was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an
>> email to chirp_users-unsubscribe@intrepid.danplanet.com
>>
>>
>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www
>> http://www.ngunn.net
>>
>>
>>
>>
>>
>>
>> --------------------------------------------------------------------------------
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Glenn at glennervin@cableone.net
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe@intrepid.danplanet.com
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/bd7bfcce/attachment-0001.html
>>
>> ------------------------------
>>
>> Message: 7
>> Date: Tue, 23 Mar 2021 12:00:29 -0400 (EDT)
>> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel@ngunn.net>
>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>> To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>, Glenn
>> K0LNY <glennervin@cableone.net>
>> Message-ID: <1865543066.169729.1616515229259@email.ionos.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Agreed. If you can, use Libre Office rather than a Microsoft product.
>> Excel messes with the empty comma seperated fields at the end of each row.
>>
>>
>>>> On 23/03/2021 11:37 Glenn K0LNY <glennervin@cableone.net> wrote:
>>> Well from the perspective of a screenreader user, I find editing
>> things much easier to make changes in a spreadsheet program outside of
>> Chirp and import them after the changes were made, so I would call that,
>> the better way.
>>> Glenn
>>> ----- Original Message -----
>>> From: Nigel A. Gunn G8IFF/W8IFF mailto:nigel@ngunn.net
>>> To: Eric Oyen mailto:eric.oyen@icloud.com ; Eric Oyen via
>> chirp_users mailto:chirp_users@intrepid.danplanet.com
>>> Sent: Tuesday, March 23, 2021 7:45 AM
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>> importing
>>> The best way is not to use CSV files at all.
>>>>> On 23/03/2021 02:08 Eric Oyen via chirp_users <
>> chirp_users@intrepid.danplanet.com mailto:
>> chirp_users@intrepid.danplanet.com > wrote:
>>>> One good way I have found to edit CsV files is to use a
>> spreadsheet program like Microsoft excel or one of the linux free variants.
>> Simply import as a cSV, do your editing, then export back to a CSV file.
>> Compare the original to the new edited version to make sure the same number
>> of commas are in place on the right lines. BTW, I have already tried this
>> on my windows box using excel and a program specifically designed for the
>> Baofeng radio. So, it should work the same way with chirp as both that
>> program and cHIRP should read or write CSV files in the same way.
>>>> DE n7zzt Eric
>>>>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <
>> rock.unroe@gmail.com mailto:rock.unroe@gmail.com > wrote:
>>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via
>> chirp_users
>>>>> <chirp_users@intrepid.danplanet.com mailto:
>> chirp_users@intrepid.danplanet.com > wrote:
>>>>>>>>> ?m trying to import a csv
>> file into CHIRP to upload back to my radio.
>>>>>> Steps I?ve taken:
>>>>>> Connected radio to CHIRP and downloaded the
>> memories to CHIRP
>>>>>> Exported memories to a CSV file
>>>>>> Added the new frequencies to the CSV file
>>>>>> Saved CSV and tried to import back to CHIRP bur
>> getting an unknown file format message
>>>>>> What am I missing?
>>>>>> Thanks for any help!
>>>>>> Steve
>>>>>> KF0CPV
>>>>>>>>> How did you edit the CSV file?
>>>>> What did you change?
>>>>> Did you compare the new CSV file to the original file
>> CSV file using a
>>>>> text editor?
>>>>> Attach both the before and after CSV files to this
>> conversation so
>>>>> that they can be reviewed.
>>>>> The most common cause of trouble is...
>>>>> - The data format of a cell was changed.
>>>>> - The number of commas required at the end of a data row
>> was changed.
>>>>> Jim KC9HI
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users@intrepid.danplanet.com mailto:
>> chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> This message was sent to Eric Oyen at
>> eric.oyen@icloud.com mailto:eric.oyen@icloud.com
>>>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe@intrepid.danplanet.com mailto:
>> chirp_users-unsubscribe@intrepid.danplanet.com
>>>> _______________________________________________ chirp_users
>> mailing list chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
>> was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an
>> email to chirp_users-unsubscribe@intrepid.danplanet.com
>>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel
>> +1-937-971-0366
>>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net
>> www http://www.ngunn.net
>>> ---------------------------------------------
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users@intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Glenn at glennervin@cableone.net
>>> To unsubscribe, send an email to
>> chirp_users-unsubscribe@intrepid.danplanet.com
>> _______________________________________________ chirp_users mailing list
>> chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message
>> was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an
>> email to chirp_users-unsubscribe@intrepid.danplanet.com
>>
>>
>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www
>> http://www.ngunn.net
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/09707b12/attachment-0001.html
>>
>> ------------------------------
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe@intrepid.danplanet.com
>>
>> End of chirp_users Digest, Vol 147, Issue 8
>> *******************************************
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/fab1a28d/attachment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Tue, 23 Mar 2021 16:27:36 -0400 (EDT)
> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel@ngunn.net>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 147, Issue 8
> To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>, Jim Self
> <jimself1954@gmail.com>
> Message-ID: <856520331.188568.1616531256149@email.ionos.com>
> Content-Type: text/plain; charset="utf-8"
>
> Follow the instruction at the bottom of every email that you recieve from this list but obviously don't read.
>
>
>> On 23/03/2021 15:35 Jim Self <jimself1954@gmail.com> wrote:
>>
>>
>> Please remove me from your mailing list.
>>
>> Turn Social Media and TV News off and all of the pain in the world goes away. You're welcome.
>>
>> On Tue, Mar 23, 2021, 3:01 PM <chirp_users-request@intrepid.danplanet.com mailto:chirp_users-request@intrepid.danplanet.com > wrote:
>>
>>>> Send chirp_users mailing list submissions to
>>> chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> or, via email, send a message with subject or body 'help' to
>>> chirp_users-request@intrepid.danplanet.com mailto:chirp_users-request@intrepid.danplanet.com
>>> You can reach the person managing the list at
>>> chirp_users-owner@intrepid.danplanet.com mailto:chirp_users-owner@intrepid.danplanet.com
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of chirp_users digest..."
>>> Today's Topics:
>>> 1. Re: I get an "unknown file format" when importing (Eric Oyen)
>>> 2. Re: Chirp does not work on my Baofeng UV-5R radio, I am
>>> deleting the program!!! (Eric Oyen)
>>> 3. Re: I get an "unknown file format" when importing
>>> (D.J.J. Ring, Jr.)
>>> 4. Help - Programing ICOM handheld IC-2GXET and IC-T7E (Allan Carson)
>>> 5. Re: I get an "unknown file format" when importing
>>> (Nigel A. Gunn G8IFF/W8IFF)
>>> 6. Re: I get an "unknown file format" when importing (Glenn K0LNY)
>>> 7. Re: I get an "unknown file format" when importing
>>> (Nigel A. Gunn G8IFF/W8IFF)
>>> ----------------------------------------------------------------------
>>> Message: 1
>>> Date: Mon, 22 Mar 2021 23:08:39 -0700
>>> From: Eric Oyen <eric.oyen@icloud.com mailto:eric.oyen@icloud.com >
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>> importing
>>> To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com >
>>> Message-ID: <2AE0C6B1-6700-4F63-95B9-9AE5F55B5E8F@icloud.com mailto:2AE0C6B1-6700-4F63-95B9-9AE5F55B5E8F@icloud.com >
>>> Content-Type: text/plain; charset="utf-8"
>>> One good way I have found to edit CsV files is to use a spreadsheet program like Microsoft excel or one of the linux free variants. Simply import as a cSV, do your editing, then export back to a CSV file. Compare the original to the new edited version to make sure the same number of commas are in place on the right lines. BTW, I have already tried this on my windows box using excel and a program specifically designed for the Baofeng radio. So, it should work the same way with chirp as both that program and cHIRP should read or write CSV files in the same way.
>>> DE n7zzt Eric
>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe@gmail.com mailto:rock.unroe@gmail.com > wrote:
>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>>> <chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com >> wrote:
>>>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>>>> Steps I?ve taken:
>>>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>>>> Exported memories to a CSV file
>>>>> Added the new frequencies to the CSV file
>>>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file format message
>>>>> What am I missing?
>>>>> Thanks for any help!
>>>>> Steve
>>>>> KF0CPV
>>>> How did you edit the CSV file?
>>>> What did you change?
>>>> Did you compare the new CSV file to the original file CSV file using a
>>>> text editor?
>>>> Attach both the before and after CSV files to this conversation so
>>>> that they can be reviewed.
>>>> The most common cause of trouble is...
>>>> - The data format of a cell was changed.
>>>> - The number of commas required at the end of a data row was changed.
>>>> Jim KC9HI
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com >
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
>>>> This message was sent to Eric Oyen at eric.oyen@icloud.com mailto:eric.oyen@icloud.com <mailto:eric.oyen@icloud.com mailto:eric.oyen@icloud.com >
>>>> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com >
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210322/3920f6a7/attachment-0001.html
>>> ------------------------------
>>> Message: 2
>>> Date: Mon, 22 Mar 2021 23:20:55 -0700
>>> From: Eric Oyen <eric.oyen@icloud.com mailto:eric.oyen@icloud.com >
>>> Subject: Re: [chirp_users] Chirp does not work on my Baofeng UV-5R
>>> radio, I am deleting the program!!!
>>> To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com >
>>> Message-ID: <2CCC8A7E-37EB-4E2F-AD10-2E1AEC656EC5@icloud.com mailto:2CCC8A7E-37EB-4E2F-AD10-2E1AEC656EC5@icloud.com >
>>> Content-Type: text/plain; charset=us-ascii
>>> Well, it certainly is handy to have the extra links. Always convenient to have local copies just in case. :)
>>> DE N7zzt Eric
>>>> On Mar 19, 2021, at 4:45 AM, Jim Unroe <rock.unroe@gmail.com mailto:rock.unroe@gmail.com > wrote:
>>>> On Fri, Mar 19, 2021 at 12:39 AM Glenn K0LNY <glennervin@cableone.net mailto:glennervin@cableone.net > wrote:
>>>>> I only program my UV 5R with Chirp in Linux.
>>>>> Glenn
>>>> My guess would be that is because your programming cable has a
>>>> Prolific type USB-to-Serial chip.
>>>> For Windows you would need to download and install the older Prolific
>>>> v3.2.0.0 device driver.
>>>> https://www.miklor.com/COM/UV_Drivers.php
>>>> For macOS you would have to purchase a 3rd party device driver
>>>> (Catalina and earlier. No Big Sur support yet.).
>>>> https://www.mac-usb-serial.com/
>>>> Linux doesn't need this extra bit of TLC because the device drivers
>>>> are open source (and don't come from the Prolific company).
>>>> Jim KC9HI
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Eric Oyen at eric.oyen@icloud.com mailto:eric.oyen@icloud.com
>>>> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
>>> ------------------------------
>>> Message: 3
>>> Date: Tue, 23 Mar 2021 02:59:47 -0400
>>> From: "D.J.J. Ring, Jr." <n1ea@arrl.net mailto:n1ea@arrl.net >
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>> importing
>>> To: Eric Oyen <eric.oyen@icloud.com mailto:eric.oyen@icloud.com >, Discussion of CHIRP
>>> <chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com >
>>> Message-ID:
>>> <CADO5RbjSUHQBUygWF+3L6u2pTT1=m9ycOgAX18WuFLV+bDW_aA@mail.gmail.com mailto:m9ycOgAX18WuFLV%2BbDW_aA@mail.gmail.com >
>>> Content-Type: text/plain; charset="UTF-8"
>>> If I'm not mistaken, there was an issue of Microsoft Excel not editing
>>> the csv files correctly and when opening such a file up and saving it
>>> again, it introduced errors.
>>> Such errors did NOT occur with the use of LibreOffice (or OpenOffice)
>>> which is available for Windows, Mac OX-X, and Linux.
>>> OpenOffice download: https://www.openoffice.org/download/
>>> LibreOffice download: https://www.libreoffice.org/download/download/
>>> (currently out of order)
>>> LibreOffice download:
>>> http://mirror.internode.on.net/pub/libreoffice/stable/7.1.1/
>>> If Microsoft Excel no longer introduces errors, someone please correct me.
>>> 73
>>> DR
>>> N1EA
>>> On Tue, Mar 23, 2021 at 2:10 AM Eric Oyen via chirp_users
>>> <chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com > wrote:
>>>> One good way I have found to edit CsV files is to use a spreadsheet program like Microsoft excel or one of the linux free variants. Simply import as a cSV, do your editing, then export back to a CSV file. Compare the original to the new edited version to make sure the same number of commas are in place on the right lines. BTW, I have already tried this on my windows box using excel and a program specifically designed for the Baofeng radio. So, it should work the same way with chirp as both that program and cHIRP should read or write CSV files in the same way.
>>>> DE n7zzt Eric
>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe@gmail.com mailto:rock.unroe@gmail.com > wrote:
>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>>> <chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com > wrote:
>>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>>> Steps I?ve taken:
>>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>>> Exported memories to a CSV file
>>>> Added the new frequencies to the CSV file
>>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file format message
>>>> What am I missing?
>>>> Thanks for any help!
>>>> Steve
>>>> KF0CPV
>>>> How did you edit the CSV file?
>>>> What did you change?
>>>> Did you compare the new CSV file to the original file CSV file using a
>>>> text editor?
>>>> Attach both the before and after CSV files to this conversation so
>>>> that they can be reviewed.
>>>> The most common cause of trouble is...
>>>> - The data format of a cell was changed.
>>>> - The number of commas required at the end of a data row was changed.
>>>> Jim KC9HI
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Eric Oyen at eric.oyen@icloud.com mailto:eric.oyen@icloud.com
>>>> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net mailto:n1ea@arrl.net
>>>> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
>>> ------------------------------
>>> Message: 4
>>> Date: Tue, 23 Mar 2021 12:23:15 +0200
>>> From: Allan Carson <amcarson1000@gmail.com mailto:amcarson1000@gmail.com >
>>> Subject: [chirp_users] Help - Programing ICOM handheld IC-2GXET and
>>> IC-T7E
>>> To: chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com
>>> Message-ID:
>>> <CANheJuSYdcmWorN0sQ_Rcyf6H_G05afhNBtOiAWU=HqQWP52rg@mail.gmail.com mailto:HqQWP52rg@mail.gmail.com >
>>> Content-Type: text/plain; charset="utf-8"
>>> Hi Chirp,
>>> Great job you guys are doing there - thanks!
>>> Can you please give me some help - I have a multi-function JiYKR cable
>>> to program my radios, but I can't seem to be able to get in to change or
>>> save any of the settings when I use the 'live' mode on Chirp. Could you
>>> give me some info on how to use the live mode and or suggest any other
>>> versions that I can use to program the IC-2GXET and IC-T7E?
>>> Thanks for your help
>>> 73
>>> Allan - ZS1AL
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/e09b712b/attachment-0001.html
>>> ------------------------------
>>> Message: 5
>>> Date: Tue, 23 Mar 2021 08:45:46 -0400 (EDT)
>>> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel@ngunn.net mailto:nigel@ngunn.net >
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>> importing
>>> To: Eric Oyen <eric.oyen@icloud.com mailto:eric.oyen@icloud.com >, Eric Oyen via chirp_users
>>> <chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com >
>>> Message-ID: <1798531439.157211.1616503546336@email.ionos.com mailto:1798531439.157211.1616503546336@email.ionos.com >
>>> Content-Type: text/plain; charset="utf-8"
>>> The best way is not to use CSV files at all.
>>>> On 23/03/2021 02:08 Eric Oyen via chirp_users <chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com > wrote:
>>>> One good way I have found to edit CsV files is to use a spreadsheet program like Microsoft excel or one of the linux free variants. Simply import as a cSV, do your editing, then export back to a CSV file. Compare the original to the new edited version to make sure the same number of commas are in place on the right lines. BTW, I have already tried this on my windows box using excel and a program specifically designed for the Baofeng radio. So, it should work the same way with chirp as both that program and cHIRP should read or write CSV files in the same way.
>>>> DE n7zzt Eric
>>>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe@gmail.com mailto:rock.unroe@gmail.com mailto:rock.unroe@gmail.com mailto:rock.unroe@gmail.com > wrote:
>>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>>>> <chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com > wrote:
>>>>>>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>>>>> Steps I?ve taken:
>>>>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>>>>> Exported memories to a CSV file
>>>>>> Added the new frequencies to the CSV file
>>>>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file format message
>>>>>> What am I missing?
>>>>>> Thanks for any help!
>>>>>> Steve
>>>>>> KF0CPV
>>>>>>>> How did you edit the CSV file?
>>>>> What did you change?
>>>>> Did you compare the new CSV file to the original file CSV file using a
>>>>> text editor?
>>>>> Attach both the before and after CSV files to this conversation so
>>>>> that they can be reviewed.
>>>>> The most common cause of trouble is...
>>>>> - The data format of a cell was changed.
>>>>> - The number of commas required at the end of a data row was changed.
>>>>> Jim KC9HI
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> This message was sent to Eric Oyen at eric.oyen@icloud.com mailto:eric.oyen@icloud.com mailto:eric.oyen@icloud.com mailto:eric.oyen@icloud.com
>>>>> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
>>>> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net mailto:nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
>>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net mailto:nigel@ngunn.net www http://www.ngunn.net
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/6698180b/attachment-0001.html
>>> ------------------------------
>>> Message: 6
>>> Date: Tue, 23 Mar 2021 10:37:38 -0500
>>> From: "Glenn K0LNY" <glennervin@cableone.net mailto:glennervin@cableone.net >
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>> importing
>>> To: "Discussion of CHIRP" <chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com >
>>> Message-ID: <0a9b01d71ffa$7528c450$7001a8c0@NUCPPYH>
>>> Content-Type: text/plain; charset="utf-8"
>>> Well from the perspective of a screenreader user, I find editing things much easier to make changes in a spreadsheet program outside of Chirp and import them after the changes were made, so I would call that, the better way.
>>> Glenn
>>> ----- Original Message -----
>>> From: Nigel A. Gunn G8IFF/W8IFF
>>> To: Eric Oyen ; Eric Oyen via chirp_users
>>> Sent: Tuesday, March 23, 2021 7:45 AM
>>> Subject: Re: [chirp_users] I get an "unknown file format" when importing
>>> The best way is not to use CSV files at all.
>>>> On 23/03/2021 02:08 Eric Oyen via chirp_users <chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com > wrote:
>>> One good way I have found to edit CsV files is to use a spreadsheet program like Microsoft excel or one of the linux free variants. Simply import as a cSV, do your editing, then export back to a CSV file. Compare the original to the new edited version to make sure the same number of commas are in place on the right lines. BTW, I have already tried this on my windows box using excel and a program specifically designed for the Baofeng radio. So, it should work the same way with chirp as both that program and cHIRP should read or write CSV files in the same way.
>>> DE n7zzt Eric
>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe@gmail.com mailto:rock.unroe@gmail.com > wrote:
>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>> <chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com > wrote:
>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>> Steps I?ve taken:
>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>> Exported memories to a CSV file
>>> Added the new frequencies to the CSV file
>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file format message
>>> What am I missing?
>>> Thanks for any help!
>>> Steve
>>> KF0CPV
>>> How did you edit the CSV file?
>>> What did you change?
>>> Did you compare the new CSV file to the original file CSV file using a
>>> text editor?
>>> Attach both the before and after CSV files to this conversation so
>>> that they can be reviewed.
>>> The most common cause of trouble is...
>>> - The data format of a cell was changed.
>>> - The number of commas required at the end of a data row was changed.
>>> Jim KC9HI
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Eric Oyen at eric.oyen@icloud.com mailto:eric.oyen@icloud.com
>>> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
>>> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net mailto:nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
>>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net mailto:nigel@ngunn.net www http://www.ngunn.net
>>> --------------------------------------------------------------------------------
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Glenn at glennervin@cableone.net mailto:glennervin@cableone.net
>>> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/bd7bfcce/attachment-0001.html
>>> ------------------------------
>>> Message: 7
>>> Date: Tue, 23 Mar 2021 12:00:29 -0400 (EDT)
>>> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel@ngunn.net mailto:nigel@ngunn.net >
>>> Subject: Re: [chirp_users] I get an "unknown file format" when
>>> importing
>>> To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com >, Glenn
>>> K0LNY <glennervin@cableone.net mailto:glennervin@cableone.net >
>>> Message-ID: <1865543066.169729.1616515229259@email.ionos.com mailto:1865543066.169729.1616515229259@email.ionos.com >
>>> Content-Type: text/plain; charset="utf-8"
>>> Agreed. If you can, use Libre Office rather than a Microsoft product. Excel messes with the empty comma seperated fields at the end of each row.
>>>> On 23/03/2021 11:37 Glenn K0LNY <glennervin@cableone.net mailto:glennervin@cableone.net > wrote:
>>>> Well from the perspective of a screenreader user, I find editing things much easier to make changes in a spreadsheet program outside of Chirp and import them after the changes were made, so I would call that, the better way.
>>>> Glenn
>>>> ----- Original Message -----
>>>> From: Nigel A. Gunn G8IFF/W8IFF mailto:nigel@ngunn.net mailto:nigel@ngunn.net
>>>> To: Eric Oyen mailto:eric.oyen@icloud.com mailto:eric.oyen@icloud.com ; Eric Oyen via chirp_users mailto:chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com
>>>> Sent: Tuesday, March 23, 2021 7:45 AM
>>>> Subject: Re: [chirp_users] I get an "unknown file format" when importing
>>>> The best way is not to use CSV files at all.
>>>>>> On 23/03/2021 02:08 Eric Oyen via chirp_users <chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com > wrote:
>>>>> One good way I have found to edit CsV files is to use a spreadsheet program like Microsoft excel or one of the linux free variants. Simply import as a cSV, do your editing, then export back to a CSV file. Compare the original to the new edited version to make sure the same number of commas are in place on the right lines. BTW, I have already tried this on my windows box using excel and a program specifically designed for the Baofeng radio. So, it should work the same way with chirp as both that program and cHIRP should read or write CSV files in the same way.
>>>>> DE n7zzt Eric
>>>>>>>> On Mar 20, 2021, at 11:39 AM, Jim Unroe <rock.unroe@gmail.com mailto:rock.unroe@gmail.com mailto:rock.unroe@gmail.com mailto:rock.unroe@gmail.com > wrote:
>>>>>> On Sat, Mar 20, 2021 at 1:25 PM Steve Vecchiarelli via chirp_users
>>>>>> <chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com > wrote:
>>>>>>>>>> ?m trying to import a csv file into CHIRP to upload back to my radio.
>>>>>>> Steps I?ve taken:
>>>>>>> Connected radio to CHIRP and downloaded the memories to CHIRP
>>>>>>> Exported memories to a CSV file
>>>>>>> Added the new frequencies to the CSV file
>>>>>>> Saved CSV and tried to import back to CHIRP bur getting an unknown file format message
>>>>>>> What am I missing?
>>>>>>> Thanks for any help!
>>>>>>> Steve
>>>>>>> KF0CPV
>>>>>>>>>> How did you edit the CSV file?
>>>>>> What did you change?
>>>>>> Did you compare the new CSV file to the original file CSV file using a
>>>>>> text editor?
>>>>>> Attach both the before and after CSV files to this conversation so
>>>>>> that they can be reviewed.
>>>>>> The most common cause of trouble is...
>>>>>> - The data format of a cell was changed.
>>>>>> - The number of commas required at the end of a data row was changed.
>>>>>> Jim KC9HI
>>>>>> _______________________________________________
>>>>>> chirp_users mailing list
>>>>>> chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com
>>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>>> This message was sent to Eric Oyen at eric.oyen@icloud.com mailto:eric.oyen@icloud.com mailto:eric.oyen@icloud.com mailto:eric.oyen@icloud.com
>>>>>> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
>>>>> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net mailto:nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
>>>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>>>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net mailto:nigel@ngunn.net www http://www.ngunn.net
>>>> ---------------------------------------------
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Glenn at glennervin@cableone.net mailto:glennervin@cableone.net
>>>> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net mailto:nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
>>> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
>>> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net mailto:nigel@ngunn.net www http://www.ngunn.net
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/09707b12/attachment-0001.html
>>> ------------------------------
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
>>> End of chirp_users Digest, Vol 147, Issue 8
>>> *******************************************
>>>> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
>
>
> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/4c88116f/attachment-0001.html
>
> ------------------------------
>
> Message: 3
> Date: Tue, 23 Mar 2021 22:18:09 -0600
> From: JP Bernier <jp.bernier@gmail.com>
> Subject: [chirp_users] WinXP issue
> To: chirp_users@intrepid.danplanet.com
> Message-ID:
> <CAESvpJPSawtqARBfKD0mTBBVdVzKvPe8hEWmhMqY5P=dGf+yOg@mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi,
> I have an old (ancient) Kenwood TM-V7A that I've programmed in the past
> with a long-dead WinXP laptop. The Kenwood had the chronic screen failure
> years ago that I had a weird hair to fix, and did with success! Now I want
> to update the programming. I found a functioning XP laptop and I've jumped
> through 10k hoops getting my modern Yaesu/ Prolific USB cable to talk to
> WInXP, but I got that to work finally (with a deeply buried legacy
> driver)... now I'm trying to install CHIRP on on the XP laptop so I can
> import my current .csv file and put it on the Kenwood. I get: "This
> application has failed to start because the application configuration is
> incorrect. Reinstalling the application may fix the problem" (it doesn't).
> I think a legacy version (2004'ish?) of CHIRP might be the thing, but I
> don't know where to find it on the CHIRP website.
>
> Conversely, I have the ancient Kenwood MCP_V7 software successfully
> installed on the XP, but it doesn't seem to import anything at all. Not
> sure the point of software that only reads the radio without the ability to
> import data to upload, but whatever. If anyone knows how to get a .csv
> file into that it would get the job done just as well.
>
> Cheers,
> JP. KF7QJY
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
> Virus-free.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210323/0ebdd6cb/attachment-0001.html
>
> ------------------------------
>
> Message: 4
> Date: Wed, 24 Mar 2021 07:05:53 -0400
> From: John Mehl <ke4egc@gmail.com>
> Subject: Re: [chirp_users] WinXP issue
> To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
> Message-ID:
> <CAP90CoLwKyZMvxPc5pCVnqxJWHPH2-CLzUPYTsJKiNBoLeN=mA@mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi JP, I don't know if this would help but the current version of CHIRP
> supports the Kewood TM V7. It might be worth trying to see if your
> programming cable will work with it. Just a thought.....John
>
>> On Wed, Mar 24, 2021 at 12:18 AM JP Bernier <jp.bernier@gmail.com> wrote:
>>
>> Hi,
>> I have an old (ancient) Kenwood TM-V7A that I've programmed in the past
>> with a long-dead WinXP laptop. The Kenwood had the chronic screen failure
>> years ago that I had a weird hair to fix, and did with success! Now I want
>> to update the programming. I found a functioning XP laptop and I've jumped
>> through 10k hoops getting my modern Yaesu/ Prolific USB cable to talk to
>> WInXP, but I got that to work finally (with a deeply buried legacy
>> driver)... now I'm trying to install CHIRP on on the XP laptop so I can
>> import my current .csv file and put it on the Kenwood. I get: "This
>> application has failed to start because the application configuration is
>> incorrect. Reinstalling the application may fix the problem" (it doesn't).
>> I think a legacy version (2004'ish?) of CHIRP might be the thing, but I
>> don't know where to find it on the CHIRP website.
>>
>> Conversely, I have the ancient Kenwood MCP_V7 software successfully
>> installed on the XP, but it doesn't seem to import anything at all. Not
>> sure the point of software that only reads the radio without the ability to
>> import data to upload, but whatever. If anyone knows how to get a .csv
>> file into that it would get the job done just as well.
>>
>> Cheers,
>> JP. KF7QJY
>>
>>
>> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> Virus-free.
>> www.avast.com
>> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
>> <#m_8937370199243590176_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to John at ke4egc@arrl.net
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe@intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210324/fbc068ea/attachment-0001.html
>
> ------------------------------
>
> Message: 5
> Date: Wed, 24 Mar 2021 08:07:44 -0400
> From: Jim Unroe <rock.unroe@gmail.com>
> Subject: Re: [chirp_users] WinXP issue
> To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
> Message-ID:
> <CADnO8U5Te1BVjCf57Y_s_ya7JdyBzRwd1GO8Bq2dugUwA9bH5g@mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
>> On Wed, Mar 24, 2021 at 12:18 AM JP Bernier <jp.bernier@gmail.com> wrote:
>>
>> Hi,
>> I have an old (ancient) Kenwood TM-V7A that I've programmed in the past with a long-dead WinXP laptop. The Kenwood had the chronic screen failure years ago that I had a weird hair to fix, and did with success! Now I want to update the programming. I found a functioning XP laptop and I've jumped through 10k hoops getting my modern Yaesu/ Prolific USB cable to talk to WInXP, but I got that to work finally (with a deeply buried legacy driver)... now I'm trying to install CHIRP on on the XP laptop so I can import my current .csv file and put it on the Kenwood. I get: "This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix the problem" (it doesn't). I think a legacy version (2004'ish?) of CHIRP might be the thing, but I don't know where to find it on the CHIRP website.
>>
>> Conversely, I have the ancient Kenwood MCP_V7 software successfully installed on the XP, but it doesn't seem to import anything at all. Not sure the point of software that only reads the radio without the ability to import data to upload, but whatever. If anyone knows how to get a .csv file into that it would get the job done just as well.
>>
>> Cheers,
>> JP. KF7QJY
>
> JP,
>
> You don't have the Microsoft Visual C++ 2008 SP1 Redistributable
> Package installed. See this link on the miklor.com website.
>
> https://www.miklor.com/COM/UV_ErrorMess.php#error20
>
> Jim KC9HI
>
>
> ------------------------------
>
> Message: 6
> Date: Wed, 24 Mar 2021 08:02:12 -0600
> From: JP Bernier <jp.bernier@gmail.com>
> Subject: Re: [chirp_users] WinXP issue
> To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
> Message-ID:
> <CAESvpJMY-MoOqLWonEQ7+7Znd-xUTJVBS3oucTiRJjJ6g_wHFg@mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Thanks Jim, I'll give that a shot.
> JP
>
>> On Wed, Mar 24, 2021, 6:09 AM Jim Unroe <rock.unroe@gmail.com> wrote:
>>
>>> On Wed, Mar 24, 2021 at 12:18 AM JP Bernier <jp.bernier@gmail.com> wrote:
>>> Hi,
>>> I have an old (ancient) Kenwood TM-V7A that I've programmed in the past
>> with a long-dead WinXP laptop. The Kenwood had the chronic screen failure
>> years ago that I had a weird hair to fix, and did with success! Now I want
>> to update the programming. I found a functioning XP laptop and I've jumped
>> through 10k hoops getting my modern Yaesu/ Prolific USB cable to talk to
>> WInXP, but I got that to work finally (with a deeply buried legacy
>> driver)... now I'm trying to install CHIRP on on the XP laptop so I can
>> import my current .csv file and put it on the Kenwood. I get: "This
>> application has failed to start because the application configuration is
>> incorrect. Reinstalling the application may fix the problem" (it doesn't).
>> I think a legacy version (2004'ish?) of CHIRP might be the thing, but I
>> don't know where to find it on the CHIRP website.
>>> Conversely, I have the ancient Kenwood MCP_V7 software successfully
>> installed on the XP, but it doesn't seem to import anything at all. Not
>> sure the point of software that only reads the radio without the ability to
>> import data to upload, but whatever. If anyone knows how to get a .csv
>> file into that it would get the job done just as well.
>>> Cheers,
>>> JP. KF7QJY
>>
>> JP,
>>
>> You don't have the Microsoft Visual C++ 2008 SP1 Redistributable
>> Package installed. See this link on the miklor.com website.
>>
>> https://www.miklor.com/COM/UV_ErrorMess.php#error20
>>
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to JP Bernier at jp.bernier@gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe@intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210324/7f1e4570/attachment-0001.html
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
>
> End of chirp_users Digest, Vol 147, Issue 9
> *******************************************
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Paul at paul.slootweg@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com