Thanks Jim. That answered the question.  Jim  W7JWT

----- Original Message -----

From: Jim Unroe

To: Discussion of CHIRP

Sent: Wednesday, July 24, 2013 2:23 PM

Subject: Re: [chirp_users] Band Width for UV-5R

On Wed, Jul 24, 2013 at 1:18 PM, Jim Tills <jtills@abbnebraska.com> wrote:

Is there a way to change the "Wide" bandwidth to "Narrow" with the CHIRP software. I don't see it on the spreadsheet.  Thanks   Jim  W7JWT

 

Actually I did find the section on settings where you could input Narrow. However, I downloaded the data to the UV-5R HT, but all memory channels still show Wide. Does anyone have a solution?  Thanks   Jim   W7JWT

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

Jim,

It doesn't sound like you are changing the right thing. It is the Mode column on the main spreadsheet.

FM=WIDE

NFM=NARROW

The upper status display of the UV-5R will show an "N" indicator for every channel that is programmed to NARROW. Having no "N" in the upper status display indicates the channel is set to WIDE.

Jim KC9HI

---

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users