My experience with a Baofeng UV-5RC is that I must download from the radio to obtain an appropriate *.img file which I modified and then uploaded to the radio. Trying to use a CSV file was hopeless. With the correct img file there are 2 buttons in the upper left DSTAR and Conventional (by some other name). I hope this helps you with the thf6a which I know is a different breed. I had to go to the bottom of the USB selection to get the right connection for Ubuntu. Fred VA6FRM
On Thu, Jun 20, 2013 at 3:07 PM, Tom Hayward esarfl@gmail.com wrote:
On Thu, Jun 20, 2013 at 2:01 PM, LeonardKeepers Leonard.Keepers@comcast.net wrote:
hi tom thank you for your reply. i did the download from the radio. yes i saw in manual how to set it to mic pc. two questions have not been answered. when going to file and clicking on new chirp comes up in dstar programming mode and my device manager tells me usb to serial connector com port 4 or 5 depending on which usb port i plug int on my computer. how do i get out of the dstar programming mode. Leonard
File > New creates a CSV which is generic and can be imported into any radio. The Dstar fields will only be imported into radios that support Dstar. You can ignore them.
I hope that answers your questions. I wasn't able to spot a second sentence in the form of a question in your email.
Tom KD7LXL _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users