I don't understand what the problem is with using a cable with fake Prolific chips. If you know what to look for and what to do when you see it, it is not a big deal. I have several radios (20+), most of the cables have fake chips in them. It takes less than a minute to roll back the driver when needed. Nice thing is, you do it for one cable, it works for all. Nothing to be afraid of, and certainly no reason to spend a bunch of money on new cables, building your own cable, or buying RT Systems stuff when you don't have to.Jardy DawsonWA7JRD Ham RadioMessage relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that!Bruce.Whatever you do, and I'm sure you've seen this on the CHIRP website as well as discussed in this forum, make sure you spend a little extra and get a cable from a reputable source that has an FTDI chipset. You will be much happier and not suffer from the Chinese knock off problem with the other chipsets.73 and enjoy!On Mon, Apr 24, 2017 at 6:54 PM, Bruce LeGrande <kb6lwn@gmail.com> wrote:
Finally got the Ubuntu mini.iso to d/l without error, got a FULL INSTALL of Ubuntu v16.04 on a USB Thumb, got Dans ppa set in the repository, and got 'chirp-daily' to d/l and install.....
(thanks to the wifi at Buddha Thai Kitchen in Middletown - best Thai food in the area)Yippee !!!!!Looks like my radios shall finally get programmed...
Checked the BTech UV-5X3, the UV-82HP, and have spent the remainder of the afternoon researching freqs and programming the Leixen VV-898S...Need to order the cable for the VX-8DR (Yaesu), and the UV-50x3 (BTech) in the truck, but I see those in the list in Chirp, so I'm very hopeful at this point...Perhaps it's time for good things to start happening here... FINALLY !!!Thanks for putting up with my rants over the last year+...
Thanks to all that offered input.
And those that silently prayed.73 - BruceSent from BlueMail
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Mike/KD6FTR at mike@mcrhome.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com This message was sent to Jardy at jardy72@yahoo.com_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to galen at galenthurber@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com