Thanks John, I was unaware that you could not override the previous data. I'll start erasing and then saving and see if that helps things. Thank you very much for the information. On Nov 5, 2015 6:54 PM, "Jim Unroe" rock.unroe@gmail.com wrote:
On Thu, Nov 5, 2015 at 12:13 PM, Gary Runningbear runningbear2000@gmail.com wrote:
Just found another problem. I enter a frequency a ct tone and an offset
and
save to a channel. This is in the VFO of Courts. then I go to channel
mode
and pull up that channel and find that the CT tone and the offset have
not
carried over. It is acting like a simplex frequency. did I do something wrong or miss something?
These radios don't use "offsets" in their memory channels. So there are none to "carry over".
CHIRP allows you to enter the channel data using RX frequency, shift direction and frequency offset, but it converts it to RX frequency and TX frequency and send that to the radio because that is what the radio requires.
http://www.miklor.com/COM/UV_MenuDef.php
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com