Yes, I have the duplex set to off on almost all of the channels. If I go to one I can talk on, it will allow the R to be displayed. Then if I switch to a channel that duplex is set to off, it still will show the R and transmit.
Sent from my iPhone
On Aug 15, 2017, at 5:20 PM, David Dixon yattonbristol@btinternet.com wrote:
Hello
Have you set the Duplex to off try this you got nothing to lose I can’t TX even when I press the scan key ( star key ) for reverse repeater
Just a thought
Regards David
On 15 Aug 2017, at 21:43, Eric H camopainter@hotmail.com wrote:
I program a lot of Boafeng uv-5r radios and have found an issue. I have a few channels I'd like to talk on and others I do not. If the reverse frequency function is turned on when on a channel you can transmit on, it will allow you to transmit on any channel in the radio. Is there a way to stop this from happening? You cannot access the reverse frequency option unless on a channel you can transmit on.
Sent from my iPhone _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David at yattonbristol@btinternet.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to ERIC at camopainter@hotmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com