Hi Bruce The two choices your seeing in chirp is NOT the driver for your cable. The driver is, either not installed or not recognized by your version of Mac OS. 10.6 I believe is snow Leopard. You may need to go to the Prolific web site and download an earlier version of your OS.
Randy VE3JPU@me.com
On Jul 9, 2018, at 6:04 PM, Mary Graff megraff@gmail.com wrote:
I also use a Mac and have a Yeasu 7900R & FT60R both communicate well, but I did have to install the RT driver which then shows an additional com port. I did find in my case, I think because of the lighting ports and using a lightening to USB connector cable I have to use 2 different physical ports for the 2 different radios. On the RTsystems inc website click on support then on the right select Yeasu Prolific driver
Good luck, Mary KM6RMA
Sent from my iPad
On Jul 9, 2018, at 1:51 PM, Bruce Warren bruce@sendlgm.com wrote:
I am using a Mac with OS 10.6.8. I want to use Chirp to communicate with a Yaesu VX-6R.
I have a USB cable from RT Systems specifically designated for the Yaesu. I installed the driver and my computer says it recognizes the USB cable.
I installed a version of Chirp and it does not crash. When I try to download from my radio using Command-D, I get a window for selecting the Port, Vendor, and model. Under the choice for Port, I get two options: "/dev/cu.Bluetooth-PDA-Sync" and "/dev/cu.Bluetooth-Modem". When I try with "/dev/cu.Bluetooth-Modem", it immediately tells me it cannot open the port. When I try with " /dev/cu.Bluetooth-PDA-Sync", it tries to do something and then errors out, saying: "Failed to communicate with the radio."
Any ideas on what is wrong or what I can do to fix it? _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Mary at megraff@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Skid at ve3jpu@me.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com