Unsubscribe
Send chirp_users mailing list submissions to
chirp_users@intrepid.danplanet.com
To subscribe or unsubscribe via the World Wide Web, visit
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
or, via email, send a message with subject or body 'help' to
chirp_users-request@intrepid.danplanet.com
You can reach the person managing the list at
chirp_users-owner@intrepid.danplanet.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of chirp_users digest..."
Today's Topics:
1. Re: Dstar ID-RP4000V Repeater (Jim Unroe)
2. Osx 10 Yosemite for PL2303 cord (Milton)
3. Re: FYI BF-F8HP programming (Michael Hilbert)
4. Re: FYI BF-F8HP programming (Jim Unroe)
5. Re: FYI BF-F8HP programming (Mike Hilbert)
6. Re: FYI BF-F8HP programming (Jim Unroe)
7. Re: FYI BF-F8HP programming (Mike Hilbert)
----------------------------------------------------------------------
Message: 1
Date: Sun, 9 Nov 2014 15:26:28 -0500
From: Jim Unroe <rock.unroe@gmail.com>
Subject: Re: [chirp_users] Dstar ID-RP4000V Repeater
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Message-ID:
<CADnO8U5Uj89GGN-aMytOyajAeGEn9iR_wxi4Lq=kiWZmBA+_6w@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
Bob,
The CHIRP driver is idrp.py and for some reason it does not show up as
a choice in CHIRP (I believe it should be "ID-2000V/4000V/2D/2V").
Most of the activity of this driver appears to be from 2009 to 2012. I
installed a daily build from May of 2012 and March of 2012 and there
was still not a selection for this Icom model.
Jim KC9HI
On Sat, Nov 8, 2014 at 11:35 PM, Robert Keeton <rkeeton@blarg.net> wrote:
> I have an ICOM , ID-RP4000V Dstar repeater. According to the Wiki page both
> the VHF and UHF repeater is supported. When I check the daily build list it
> is not shown as supported and I could not locate a *.py file for the
> repeater. I have been through the archives and found reference that support
> for the ID-RP400V was added and it was working , but not much other info.
> When I run Chirp to try detect the repeater/radio I get an error message ?
> An error has occurred Unable to get radio model?. I have tried both the
> most up to date windows version and a USB thumb drive with the Live CD
> loaded. Both versions operate fine , but with the error message. Any
> suggestions????
>
> Bob K7MHJ
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
------------------------------
Message: 2
Date: Mon, 10 Nov 2014 08:56:30 -0500
From: Milton <thecanesvenatici@gmail.com>
Subject: [chirp_users] Osx 10 Yosemite for PL2303 cord
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Message-ID:
<CAChAUo=77d+ajEMJFDBeoTAE_azM2_zQAFz5XKft0K+EtPDHTg@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
I've installed the supposed updated driver from Sorceforge but no worky.
kextstat -b nl.bjaelectronics.driver.PL2303 is empty
also
Kext nl.bjaelectronics.driver.PL2303 not found for unload request.
Kext net.sourceforge.osx-pl2303 not found for unload request.
Kext com.prolific.driver.PL2303 not found for unload r
Any ideas?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20141110/631cd05f/attachment-0001.html
------------------------------
Message: 3
Date: Mon, 10 Nov 2014 09:17:04 -0700
From: Michael Hilbert <mikehilbert1@gmail.com>
Subject: Re: [chirp_users] FYI BF-F8HP programming
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Message-ID:
<CADXhZy5z0h+nFwdy+TDy-T96vcNKPr9MgZqDy5nOPgzGmne9xw@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
I can download from the radio but cannot upload same file back to the
radio. The following error occurs:
Unsupported Firmware Version ....N5R-313F8HP-1
Have successfully used the cable for Uv5r+ just now but new Bf-F8HP gives
the error above. Help? Mike
On Mon, Oct 13, 2014 at 1:06 PM, Forrest Joyner <wfj@usa.com> wrote:
> Got mine in today and did a test download (1st!!) and then a test change
> and it uploaded perfectly. I?m using the daily build of Chirp and a Mac
> Mini and the same cable that I use with my UV-82 and UV-82C.
>
> No worries?.
>
> :)
>
> Forrest
>
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20141110/c29d6f62/attachment-0001.html
------------------------------
Message: 4
Date: Mon, 10 Nov 2014 12:23:56 -0500
From: Jim Unroe <rock.unroe@gmail.com>
Subject: Re: [chirp_users] FYI BF-F8HP programming
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Message-ID:
<CADnO8U5ft2Xu6+QVemJWmbs5YBLAPqP5p3=HLquG6PKexr9azg@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
It doesn't sound like you are using the latest CHIRP daily build.
Which version of CHIRP are you using?
Jim KC9HI
On Mon, Nov 10, 2014 at 11:17 AM, Michael Hilbert
<mikehilbert1@gmail.com> wrote:
> I can download from the radio but cannot upload same file back to the radio.
> The following error occurs:
>
> Unsupported Firmware Version ....N5R-313F8HP-1
>
> Have successfully used the cable for Uv5r+ just now but new Bf-F8HP gives
> the error above. Help? Mike
>
> On Mon, Oct 13, 2014 at 1:06 PM, Forrest Joyner <wfj@usa.com> wrote:
>>
>> Got mine in today and did a test download (1st!!) and then a test change
>> and it uploaded perfectly. I?m using the daily build of Chirp and a Mac
>> Mini and the same cable that I use with my UV-82 and UV-82C.
>>
>> No worries?.
>>
>> :)
>>
>> Forrest
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
------------------------------
Message: 5
Date: Mon, 10 Nov 2014 10:30:38 -0700
From: Mike Hilbert <mikehilbert1@gmail.com>
Subject: Re: [chirp_users] FYI BF-F8HP programming
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Message-ID: <EF146E91-8ABD-4E3C-8999-9663B3B59E83@gmail.com>
Content-Type: text/plain; charset=utf-8
4.1
Sent from my iPhone
> On Nov 10, 2014, at 10:23 AM, Jim Unroe <rock.unroe@gmail.com> wrote:
>
> It doesn't sound like you are using the latest CHIRP daily build.
> Which version of CHIRP are you using?
>
> Jim KC9HI
>
> On Mon, Nov 10, 2014 at 11:17 AM, Michael Hilbert
> <mikehilbert1@gmail.com> wrote:
>> I can download from the radio but cannot upload same file back to the radio.
>> The following error occurs:
>>
>> Unsupported Firmware Version ....N5R-313F8HP-1
>>
>> Have successfully used the cable for Uv5r+ just now but new Bf-F8HP gives
>> the error above. Help? Mike
>>
>>> On Mon, Oct 13, 2014 at 1:06 PM, Forrest Joyner <wfj@usa.com> wrote:
>>>
>>> Got mine in today and did a test download (1st!!) and then a test change
>>> and it uploaded perfectly. I?m using the daily build of Chirp and a Mac
>>> Mini and the same cable that I use with my UV-82 and UV-82C.
>>>
>>> No worries?.
>>>
>>> :)
>>>
>>> Forrest
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users@intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
------------------------------
Message: 6
Date: Mon, 10 Nov 2014 12:40:07 -0500
From: Jim Unroe <rock.unroe@gmail.com>
Subject: Re: [chirp_users] FYI BF-F8HP programming
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Message-ID:
<CADnO8U5sfMXe-z=ewARv=F8JM_=K2bBYLM_EYzusMf9tB_Bppw@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
There is no support for the BF-F8HP in V0.4.1. Because of firmware
changes, it is not recommended that the stable release be used for any
Baofeng UV-5R variants including the BF-F8HP. Upgrade to the latest
daily build for BF-F8HP support
Jim KC9HI
On Mon, Nov 10, 2014 at 12:30 PM, Mike Hilbert <mikehilbert1@gmail.com> wrote:
> 4.1
>
> Sent from my iPhone
>
>> On Nov 10, 2014, at 10:23 AM, Jim Unroe <rock.unroe@gmail.com> wrote:
>>
>> It doesn't sound like you are using the latest CHIRP daily build.
>> Which version of CHIRP are you using?
>>
>> Jim KC9HI
>>
>> On Mon, Nov 10, 2014 at 11:17 AM, Michael Hilbert
>> <mikehilbert1@gmail.com> wrote:
>>> I can download from the radio but cannot upload same file back to the radio.
>>> The following error occurs:
>>>
>>> Unsupported Firmware Version ....N5R-313F8HP-1
>>>
>>> Have successfully used the cable for Uv5r+ just now but new Bf-F8HP gives
>>> the error above. Help? Mike
>>>
>>>> On Mon, Oct 13, 2014 at 1:06 PM, Forrest Joyner <wfj@usa.com> wrote:
>>>>
>>>> Got mine in today and did a test download (1st!!) and then a test change
>>>> and it uploaded perfectly. I?m using the daily build of Chirp and a Mac
>>>> Mini and the same cable that I use with my UV-82 and UV-82C.
>>>>
>>>> No worries?.
>>>>
>>>> :)
>>>>
>>>> Forrest
>>>>
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users@intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>
>>>
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users@intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
------------------------------
Message: 7
Date: Mon, 10 Nov 2014 11:14:37 -0700
From: Mike Hilbert <mikehilbert1@gmail.com>
Subject: Re: [chirp_users] FYI BF-F8HP programming
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Message-ID: <50DEF662-C210-4933-956D-6A527B767B37@gmail.com>
Content-Type: text/plain; charset=utf-8
That worked Jim. Thank you very much! Mike AF7JS.
Sent from my iPhone
> On Nov 10, 2014, at 10:40 AM, Jim Unroe <rock.unroe@gmail.com> wrote:
>
> There is no support for the BF-F8HP in V0.4.1. Because of firmware
> changes, it is not recommended that the stable release be used for any
> Baofeng UV-5R variants including the BF-F8HP. Upgrade to the latest
> daily build for BF-F8HP support
>
> Jim KC9HI
>
>> On Mon, Nov 10, 2014 at 12:30 PM, Mike Hilbert <mikehilbert1@gmail.com> wrote:
>> 4.1
>>
>> Sent from my iPhone
>>
>>> On Nov 10, 2014, at 10:23 AM, Jim Unroe <rock.unroe@gmail.com> wrote:
>>>
>>> It doesn't sound like you are using the latest CHIRP daily build.
>>> Which version of CHIRP are you using?
>>>
>>> Jim KC9HI
>>>
>>> On Mon, Nov 10, 2014 at 11:17 AM, Michael Hilbert
>>> <mikehilbert1@gmail.com> wrote:
>>>> I can download from the radio but cannot upload same file back to the radio.
>>>> The following error occurs:
>>>>
>>>> Unsupported Firmware Version ....N5R-313F8HP-1
>>>>
>>>> Have successfully used the cable for Uv5r+ just now but new Bf-F8HP gives
>>>> the error above. Help? Mike
>>>>
>>>>> On Mon, Oct 13, 2014 at 1:06 PM, Forrest Joyner <wfj@usa.com> wrote:
>>>>>
>>>>> Got mine in today and did a test download (1st!!) and then a test change
>>>>> and it uploaded perfectly. I?m using the daily build of Chirp and a Mac
>>>>> Mini and the same cable that I use with my UV-82 and UV-82C.
>>>>>
>>>>> No worries?.
>>>>>
>>>>> :)
>>>>>
>>>>> Forrest
>>>>>
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users@intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users@intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users@intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users@intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
------------------------------
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
End of chirp_users Digest, Vol 71, Issue 5
******************************************