Thanks for the reply.
The only release I seem to be able to get to off the site is: chirp-daily-20121222-installer.exe. Are there other versions in other locations?
Doug
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Wednesday, February 20, 2013 12:45 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng UV-5R+Upload Error
Doug, Use the 0.3.0 stable release or latest daily build and you should be good. Jim KC9HI
On Feb 20, 2013 12:18 PM, "Doug Gilbert" dougandsharon@tampabay.rr.com wrote:
Model: Baofeng UV-5R+
Firmware: BFB297
Driver: Prolilfic 3.2.0.0
Operating System: Windows 7 Service Pack 1
Chirp: Daily Build 20121222
I just purchased the UV-5R+ and tried to connect it up to Chirp. Got through the driver installation and Chirp software install thanks to the documentation provided on MIKLOR.
I am able to Download the radio parameters into Chirp fine - the "Cloning" window pops up and everything appears to show fine. However after making a frequency change to one channel and trying to Upload the changes back to the radio, I get the message: "Unsupported Firmware Version BFB301 BFB297". This happens right after the "Cloning" window pops up.
Since there are so many variables to analyze for potential problems, I downloaded the Baofeng VIP software version: V120725 and tried the same scenario - everything seems to work fine there - Download/Upload.
Is Firmware Version BFB297 supported yet by CHIRP?
Thanks,
Doug
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users