You may need to put the channels into a bank. I noticed this trouble also with the ID-880H - it does not force the channels into a bank, and it's not clear that this is required. Give that a try, and report here.
VERY HAPPY with the new IC-7100 support!!
On 10/18/16 12:08 AM, Creede Lambard wrote:
I’ve seen this sort of thing posted before on the list but I haven’t noticed a fix or workaround.
I’m running OS X 10.10 (Yosemite) on a Macbook Pro. Last weekend I bought a brand new Icom ID-880H after checking to make sure that it’s supported according to the Chirp wiki. This afternoon I got a FTDI-based USB cable from BlueMax49 and figured I’d clone my radio, then upload the results back.
I was able to successfully clone the memory, so it looks like the drivers and cable are working, and I noticed that Chirp includes D-STAR information - something I’d never had call to notice before as this is my first D-STAR capable radio! Well done! Unfortunately, when I changed one tone setting and gave the channels labels, then went to upload the information back to the radio, the Chirp progress bar went all the way to the right, but then I got an error message:
“Failed to communicate with radio: Did not get clone result from radio”
That’s not the worst part, though. After Chirp errors out the radio is stuck at “CL IN”. When I shut the radio off and turn it back on again the display says CLEAR, then the ICOM banner and finally the radio is back to a factory restored state. All of the memories I programmed in over the weekend are gone. Happily, they are stored in a .img file on the Mac; unhappily, I can’t seem to get the file to load into the radio.
For what it’s worth, I get the same error when I try to upload an image with only one memory slot filled in.
Is this a known issue? Is there a workaround? What can I do to get Chirp working? I’ve been using the software for years and this is the first problem I’ve had with it. I can send a copy of the .img file if you need me to.
Thanks.
-- Creede Lambard Sent with Airmail
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Drew from Zhrodague at drew@zhrodague.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com