-------- Original Message --------
Subject: Re: [chirp_users] Baofeng uvr5a - chirp offset settings won't
save
From: Larry <lhlauer@earthlink.net>
Date: Fri, June 21, 2013 7:50 am
To: allan.cordova@gmail.com, Discussion of CHIRP
<chirp_users@intrepid.danplanet.com>

As long as the transmit and receive frequency are correct ignore the 000 offset. The boafeng will also ignore the 000. That is just how the radio works. Even if you program from the key pad the radio ignores the offset. It only works from the transmit and receive frequency
WB2UFO
-- Larry
Sent from my Nexus 7

Allan Cordova <allan.cordova@gmail.com> wrote:

Hello,

In uploading the chirp settings to my baofeng uv5ra, it appears that all settings are saving to to the radio correctly - except for the offset settings which just read 0.000. The frequencies are for 70 cm fm receivers in my area, so all the values in the chirp file are 5 MHz.

Apologies if this question is better directed to a baofeng support forum, but I suspected some folks on this mailing list were likely to have encountered this question before.

Thanks in advance for any feedback,

Allan

chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users