This is not a Baofeng, it is a BTech 5X3. I have 2 of the 5X3 models and the work as they should with CHIRP.
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of chirp@ish.net Sent: Tuesday, August 23, 2016 7:45 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Not working with new Baofeng UV-5X3
My new Baofeng UV-5X3 tri-band HT -- https://baofengtech.com/uv-5x3 -- just arrived and CHIRP does not even communicate with it. I have a fair amount of experience with other Baofeng models and the software, and I confirmed that exactly the same configuration and cabling is still working with my UV-5R.
I have the 20160819 release of CHIRP. I tried using the UV-5X setting first, and then after than didn't work tried a number of other settings including UV-5R, BF-F8HP, and so on. The "Clone progress" dialogue is shown but the progress bar remains unmoved, an error dialogue pops up that reads "An error has occurred" and "Radio did not respond", followed by a delay before the radio lights up its LED green and then red.
This is on Windows 10 and I could try on Ubuntu 16.04 if requested, but as I said this is a working system for other radios.
-- Mike
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John LaMartina at johnla@usa.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7752 / Virus Database: 4647/12864 - Release Date: 08/23/16